Professor Mustafizur Rahman

Home » Publications

Publications

 

Professor Mustafizur Rahman shares his vast experience by presenting many papers including keynote addresses in very reputed international conferences, like, ICOMM USA, 4M in Europe, etc. He has authored more than 500 journal and conference papers, and published many papers in very reputed international journals, like, IJMTM UK, CIRP France, etc.

Specifically, the following papers, all published in top outlets, provide what may well be the most relevant foundation for current and future research in manufacturing.

International Refereed Journals

  1. NEO, W K, A Senthil kumar and M Rahman, “An Automated Guilloche Machining Technique for the Fabrication of Polygonal Fresnel Lens Array”.  Precision Engineering ‑ Journal of the International Societies for Precision Engineering and Nanotechnology, 41  (2015): 55‑62
  2. HUANG, R, X.Q Zhang, M Rahman, A Senthil kumar and Kui Liu, “Ultraprecision machining of radial Fresnel lens on roller moulds”. CIRP Annals‑Manufacturing Technology,  (2015).
  3. CHAUDHARI, A, M SANKARANARAYANASAMY, A Senthil kumar*, M Rahman and K.S Woon, “The Effect of Pilot Hole Geometry on Tool Wear in Single‑Lip Deep Hole Drilling of      Ni‑based Alloy”. SME Manufacturing Engineering Transactions and NAMRC 10,  (2015).
  4. NEO, W K, A Senthil kumar and M Rahman, “A novel surface analytical model for cutting linearization error in fast tool/slow slide servo diamond turning”. Precision Engineering ‑ Journal of the International Societies for Precision Engineering and Nanotechnology,  38, no. 4  (2014).
  5. Zhang, X.Q, K Liu, A Senthil kumar and M Rahman, “A study of the diamond tool wear suppression mechanism in vibration‑assisted machining of steel”. Journal of Materials Processing Technology,  214, no. 2  (2014): 496‑506.
  6. Woon, K S, M Rahman, A CHAUDHARI and A Senthil kumar, “The Effects of Tool Degradation on Hole Straightness in Deep Hole Gundrilling of Inconel‑718”. CIRP Proceedings ‑ Manufacturing Systems,  (2014).
  7. ZHANG, X, A Senthil kumar, M Rahman and Kui Liu Kui Liu, “Modeling of the effect of tool edge radius on surface generation in elliptical vibration cutting”. International Journal of Advanced Manufacturing Technology, (2013): 1‑8.
  8. ZHANG, X, M ARIF, Kui Liu Kui Liu, A Senthil kumar and M Rahman, “A model to predict the critical undeformed chip thickness in vibration‑assisted machining of brittle materials”. International Journal of Machine Tools & Manufacture,  (2013).
  9. NEO, W K, A Senthil kumar and M Rahman, “A novel method for layered tool path generation in the fast tool servo diamond turning of noncircular microstructural surfaces”.  Proceedings of the Institution of Mechanical Engineers Part B‑Journal of Engineering Manufacture,  227, no. 2  (2013): 210‑219
  10. Woon, K S, M Rahman, A CHAUDHARI and A Senthil kumar, “The Effects of Tool Degradation on Hole Straightness in Deep Hole Gundrilling of Inconel‑718”. CIRP Proceedings ‑ Manufacturing Systems,  (2014).
  11. ARIF, M, M Rahman, Y S Wong and A Senthil kumar, “An empirical study on the characterization of machined surface integrity by chip morphology in dry end‑milling of Titanium alloy”.
  12. Proceedings of the Institution of Mechanical Engineers Part B‑Journal of Engineering Manufacture, (2013).
  13. NGUYEN, M D, Y S Wong and M Rahman, “Transitions of micro‑EDM/SEDCM/micro‑ECM milling in low‑resistivity deionized water”. International Journal of Machine Tools & Manufacture,  (2013).
  14. Yu*, DP, SW Gan, G S Hong, Y S Wong, M Rahman and J Yao, “Optimized tool path generation for fast tool servo diamond turning of micro‑structured surfaces”. International Journal of Advanced Manufacturing Technology,  63, no. 9‑12  (2012): 1137‑1152.
  15. ARIF, M, M Rahman and Y S Wong, “A Study on the effect of tool‑edge radius on critical machining characteristics in ultra‑precision milling of tungsten carbide”. International Journal of Advanced Manufacturing Technology,  (2012): 1‑9.
  16. ASMA, P, Y S Wong and M Rahman, “Characterization and online monitoring of wear behaviour of on machine fabricated PCD micro‑tool while vertical micro‑grinding of BK7 glass Vol. 4, No.4 304 ‑ 324.”.  International Journal of Abrasive Technology,  4, no. 4  (2012): 304‑324.  (Others).
  17. ASMA, P, Y S Wong and M Rahman, “Fabrication of different geometry cutting tools and their effect on the vertical micro grinding of BK7 glass”.  International Journal of Advanced Manufacturing Technology,  (2012): 1‑15.
  18. ZHANG, X, A Senthil kumar, M Rahman, N Chandra and K Liu, “An analytical force model for orthogonal elliptical vibration cutting technique”. Journal of Manufacturing Processes (SME),  14, no. 3  (2012).
  19. NGUYEN, M D, M Rahman and Y S Wong, “Enhanced surface integrity and dimensional accuracy by simultaneous micro‑ED/EC milling”. CIRP Annals‑Manufacturing Technology,  61  (2012).
  20. Woon, K S, M Rahman and K Liu, “A non‑dimensional analysis of tool edge radius effect on the mechanics of micromachining”. Advanced Materials Research,  565  (2012): 576‑581.
  21. NGUYEN, M D, M Rahman and Y S Wong, “Simultaneous micro‑EDM and micro‑ECM in low‑resistivity deionized water”. International Journal of Machine Tools & Manufacture, 55/56  (2012): 55‑65.
  22. ASMA, P, P J MUHAMMAD, M Rahman and Y S Wong, “A study on micro grinding of brittle and difficult‑to‑cut glasses using on‑machine fabricated poly crystalline diamond (PCD) tool”. Journal of Materials Processing Technology,  212  (2012): 580‑593.
  23. ARIF, M, M Rahman and Y S Wong, “A state‑of‑the‑art review of ductile cutting of silicon wafers for semiconductor and microelectronics industries”. International Journal of Advanced Manufacturing Technology, part. 10.1007/s00170‑012‑3937‑2  (2012).
  24. Sun*, J, Y S Wong, G S Hong and M Rahman, “Feature analysis in tool condition monitoring: A case study in titanium machining”. International Journal of Computer Applications in Technology,  45, no. 2‑3  (2012): 177‑185.
  25. Lim, C.S, MH Hong, A Senthil kumar, M Rahman and T C Chong, “Study of field intensity distribution of laser beam propagating through a micro‑lens array”. Applied Physics A‑Materials Science & Processing, 107, no. 1  (2012): 149‑153.
  26. MUHAMMAD, P J, M Rahman and Y S Wong, “EXPERIMENTAL INVESTIGATIONS INTO THE INFLUENCE OF MAJOR OPERATING PARAMETERS DURING MICRO‑ELECTRODISCHARGE DRILLING OF CEMENTED CARBIDE”. Machining Science and Technology,  16, no. 1  (2012): 131‑156.
  27. ARIF, M, M Rahman and Y S Wong, “An experimental investigation into micro ball end‑milling of silicon”. Journal of Manufacturing Processes (SME),  14, no. 1  (2012): 52‑61.
  28. Wong, Y S, P J MUHAMMAD and M Rahman, “EXPERIMENTAL INVESTIGATIONS INTO THE INFLUENCE OF MAJOR OPERATING PARAMETERS DURING MICRO‑ELECTRODISCHARGE DRILLING OF CEMENTED CARBIDE,”. Machining Science and Technology,  16, no. 1  (2012): 131‑156.
  29. NGUYEN, M D, M Rahman and Y S Wong, ” An experimental study on micro‑EDM in low‑resistivity deionized water using short voltage pulses”. International Journal of Advanced Manufacturing Technology,  58  (2012): 533‑544.
  30. Wong, Y S, M ARIF and M Rahman, “Analytical model to determine the critical conditions for the modes of material removal in the milling process of brittle material”. Journal of Materials Processing Technology,  (2012).
  31. ASMA, P, M Rahman and Y S Wong, “Analysis of surface and subsurface damage of micro‑ground Bk7 glass using on machine fabricated PCD micro‑tool”. International Journal of Abrasive Technology, (2012).  (Others).
  32. ARIF, M, X ZHANG and M Rahman, ” A Model to Determine the Effect of Tool Diameter on the Critical Feed Rate for Ductile‑Brittle Transition in Milling Process of Brittle Material”. Journal of Manufacturing Science and Engineering‑Transactions of the ASME, (2012).
  33. MUHAMMAD, P J, S TANVEER, M Rahman and Y S Wong, “Study of Micro‑EDM of Tungsten Carbide with Workpiece Vibration”. Advanced Materials Research, 264‑265  (2011): 1056‑1061.
  34. MUHAMMAD, P J, M Rahman and Y S Wong, “Study of the diffusion of carbon, its sources and effect on finishing micro‑EDM performance of cemented carbide”. Journal of Materials Engineering and Performance, part. 10.1007/s11665‑011‑0083‑1 (2011).
  35. Wong, Y S, M ARIF and M Rahman, “An experimental investigation into micro ball end‑milling of silicon”. International Journal of Advanced Manufacturing Technology,  14, no. 1  (2011): 52‑61.
  36. MUHAMMAD, P J, M Rahman and Y S Wong, “A review on the conventional and micro electro discharge machining of tungsten carbide”. International Journal of Machine Tools & Manufacture,  51, no. 12  (2011): 837‑858.  (United Kingdom).  (Ranked #7 in the SciVerse ScienceDirect Top 25 Hottest Article (Engineering) in International Journal of Machine Tools and Manufacture, October to December, 2011).
  37. ZHANG, X, A Senthil kumar, M Rahman, C Nath and K Liu, “Experimental study on ultrasonic elliptical vibration cutting of hardened steel using PCD tools”. Journal of Materials Processing Technology,  211, no. 11  (2011): 1701‑1709.
  38. ASMA, P, P J MUHAMMAD, M Rahman and Y S Wong, “Cutting Force Analysis of On‑Machine Fabricated PCD Tool during Glass Micro‑Grinding Volumes 264 – 265, 1085 – 1090, 2011.”.  Advanced Materials Research,  264‑265  (2011): 1085‑1090.
  39. ARIF, M, M Rahman and Y S Wong, “An experimental study on the machining characteristics in ductile‑mode milling of BK‑7 glass”. International Journal of Advanced Manufacturing Technology, part. 10.1007/s00170‑011‑3626‑6  (2011).
  40. ZHANG, X, A Senthil kumar and M Rahman, “A study on surface generation along nominal cutting direction in elliptical vibration cutting”. Advanced Materials Research,  314‑316  (2011): 1851‑1856.
  41. JAHAN*, M.P., T.W. LIEH, Y S Wong and M Rahman, “An Experimental Investigation into the Micro‑electrodischarge Machining Behavior of p‑type Silicon”. International Journal of Advanced Manufacturing Technology,  57, no. 5‑8  (2011): 617‑637.
  42. MUHAMMAD, P J, M Rahman and Y S Wong, “Study on the nano‑powder‑mixed sinking and milling micro‑EDM of WC‑Co”. International Journal of Advanced Manufacturing Technology,  53, no. 1‑4  (2011): 167‑180.
  43. ASMA, P, P J MUHAMMAD, M Rahman and Y S Wong, “A study on microgrinding of brittle and difficult‑to‑cut glasses using on‑machine fabricated poly crystalline diamond (PCD) tool”. Journal of Materials Processing Technology,  (2011).
  44. NATH, C, M Rahman and K S Neo, “Modeling of the Effect of Machining Parameters on Maximum Thickness of Cut in Ultrasonic Elliptical Vibration Cutting”. Journal of Manufacturing Science and Engineering‑Transactions of the ASME,  133, no. 1  (2011): art. No. 011007.
  45. INDRANEEL, B, A Senthil kumar and M Rahman, “Estimation of Wheel Wear in Electrolytic In‑process Dressing (ELID) and Grinding”. International Journal of Abrasive Technology,  4, no. 1  (2011): 41‑56.  (Others).
  46. ARIF, M, M Rahman and Y S Wong, “Ultraprecision ductile mode machining of glass by micromilling process”. Journal of Manufacturing Processes (SME),  13, no. 1  (2011): 50‑59.
  47. ARIF, M, M Rahman and Y S Wong, “Analytical modeling of ductile‑regime machining of tungsten carbide by endmilling”. International Journal of Advanced Manufacturing Technology,  55, no. 1‑4  (2011): 53‑64.
  48. ARIF, M, M Rahman and Y S Wong, “Analytical model to determine the critical feed per edge for ductile‑brittle transition in milling process of brittle materials”. International Journal of Machine Tools & Manufacture,  51, no. 3  (2011): 170‑181
  49. MUHAMMAD, P J, M Rahman and Y S Wong, “Modeling and experimental investigation on the effect of nanopowder mixed dielectrics in fine‑finish micro‑EDM of tungsten carbide”. Proceedings of the Institution of Mechanical Engineers Part B‑Journal of Engineering Manufacture, 224  (2010).
  50. ARIF, M, M Rahman and Y S Wong, “An experimental approach to study the capability of end‑milling for microcutting of glass”. International Journal of Advanced Manufacturing Technology, 53, no. 9‑12  (2010): 1063‑1073.
  51. ARIF, M, M Rahman, Y S Wong and A Senthil kumar, “An empirical study on the characterization of machined surface integrity by chip morphology in dry end‑milling of Titanium alloy”.
  52. INDRANEEL, B, A Senthil kumar and M Rahman, “Experimental Study of Wheel Wear in Electrolytic In‑Process Dressing and Grinding”. International Journal of Advanced Manufacturing Technology,  50, no. 9‑12  (2010): 931‑940.
  53. NATH, C, S TANVEER, M Rahman and Y S Wong, “Development, Modeling, and Experimental Investigation of Low Frequency Workpiece Vibration‑Assisted Micro‑EDM of Tungsten Carbide”. Journal of Manufacturing Science and Engineering‑Transactions of the ASME,  132, no. 5  (2010).
  54. Wong, Y S, M ARIF and M Rahman, “An experimental study on microcutting of soda‑lime glass by milling process”. KEY ENGINEERING MATERIALS,  447‑448  (2010): 116‑120.
  55. Lim, CS, MH Hong, Y Lin, L S Tan, A Senthil kumar and M Rahman, “LARGE AREA PARALLEL SURFACE NANOSTRUCTURING WITH LASER IRRADIATION THROUGH MICROLENS ARRAYS”. Surface Review and Letters,  17, no. 3  (2010): 383‑387
  56. MUHAMMAD, P J, M Rahman and Y S Wong, “On‑machine fabrication of high‑aspect‑ratio microelectrodes and application in vibration‑assisted micro‑EDM drilling of tungsten carbid”. Proceedings of the Institution of Mechanical Engineers Part B‑Journal of Engineering Manufacture,  224  (2010).
  57. Li, X P, M CAI, M Rahman and S Liang, “STUDY OF THE UPPER BOUND OF TOOL EDGE RADIUS IN NANOSCALE DUCTILE MODE CUTTING OF SILICON WAFER”. International Journal of Advanced Manufacturing Technology, 48  (2010): 993‑999.
  58. Rahman, M, B M A A ABU, T Masaki, T Saleh, Y S Wong and A Senthil kumar, “A Multiprocess Machine tool for compound micromachining”. International Journal of Machine Tools & Manufacture,  50, no. 4  (2010): 334‑356.
  59. MOHAMMAD, A H and M Rahman, “Performance analysis of EDM electrode fabricated by localized electrochemical deposition for micro‑machining of stainless steel”. International Journal of Advanced Manufacturing Technology, 49, no. 9‑12  (10.1007/s00170‑009‑2479‑8 2010): 975‑986.
  60. MOHAMMAD, A H, S TANVEER and M Rahman, “Modeling for fabrication of micro electrodes by localized electrochemical deposition for micro‑EDM”. Proceedings of the Institution of Mechanical Engineers Part B‑Journal of Engineering Manufacture,  224, no. 11  (doi: 10.1243/09544054JEM1 2010): 1741‑1755.
  61. WOON, K S and M Rahman, “The effect of tool edge radius on the chip formation behaviour of tool‑based micromachining”. International Journal of Advanced Manufacturing Technology, 50, no. 9‑12  ( DOI: 10.1007/s00170‑010‑ 2010): 961‑977.
  62. WOON, K S, M Rahman and K Liu, “Numerical and experimental study of contact behaviour in tool‑based micromachining of steel”. International Journal of Precision Engineering and Manufacturing,  (2010).
  63. WOON, K S and M Rahman, “Extrusion‑like chip formation mechanism and its role in suppressing void nucleation”. CIRP Annals‑Manufacturing Technology,  (2010).
  64. INDRANEEL, B, A Senthil kumar and M Rahman, “A study on the equilibrium condition of oxide layer in ELID grinding”. International Journal of Abrasive Technology,  3, no. 1  (2010): 25‑36.  (Others).
  65. Rahman, M, B M A A ABU, T Masaki, S TANVEER, Y S Wong and H S Lim, “Multi‑process machine tool for compound micromachining”. International Journal of Machine Tools & Manufacture,  50, no. 4  (2009): 344‑356.
  66. MUHAMMAD, P J, M Rahman, Y S Wong and F LEE, “On‑machine fabrication of high‑aspect‑ratio microelectrodes and application in vibration‑assisted micro‑EDM drilling of tungsten carbide”. Proceedings of the Institution of Mechanical Engineers Part B‑Journal of Engineering Manufacture, 224, no. 5  (2009): 795‑814.
  67. MUHAMMAD, P J, Y S Wong and M Rahman, “A study on the fine‑finish die‑sinking micro‑EDM of Tungsten Carbide using different electrode materials”. Journal of Materials Processing Technology, 209, no. 8  (2009): 3956‑3967.
  68. MUHAMMAD, P J, Y S Wong and M Rahman, “A study on the quality micro‑hole machining of Tungsten Carbide by micro‑EDM process using Transistor and RC‑type pulse Generator”. Journal of Materials Processing Technology, 209, no. 4  (2009): 1706‑1716, 11.
  69. ALOKESH*, P, K S Neo, M Rahman, X P Li, M Sawa and Y Maeda, “Ultra‑Precision Turning of Electroless‑Nickel: Effects of crystal orintation and origin of diamond tools”. International Journal of Advanced Manufacturing Technology, 43, no. 7‑8  (2009): 681‑689.
  70. CHANDRA, N, M Rahman and K S Neo, “Machinability study of tungsten carbide using PCD tools under ultrasonic elliptical vibration cutting”. International Journal of Machine Tools & Manufacture, 49, no. 14  (2009): 1089–1095.
  71. MUHAMMAD, P J, M A MOHAMMED, Y S Wong and M Rahman*, “Nanofinishing of hard materials using micro‑electrodischarge machining”. Proceedings of the Institution of Mechanical Engineers Part B‑Journal of Engineering Manufacture, 223, no. 9  (2009): 1127‑1142.
  72. GAN, S W, M Rahman and H S Lim, “Development of a fine tool servo with force monitoring system for nanomachining applications”. Journal of Vacuum Science and Technology B, 27, no. 3  (2009): 1272‑1277.
  73. CHANDRA, N, M Rahman and K S Neo, “Enhancing the performance of polycrystalline diamond tools for machining WC by ultrasonic elliptical vibration cutting method”. Journal of Vacuum Science and Technology B, 27, no. 3  (2009): 1241‑1246.
  74. MUHAMMAD, P J, Y S Wong, M Rahman and B M A A ABU, “An experimental investigation on the surface characteristics of Tungsten Carbide for the fine‑finish Die‑sinking and Scanning micro‑EDM”. International Journal of Abrasive Technology, 2, no. 3  (2009): 223‑244.  (Others).
  75. MOHAMMAD, A H, S W GAN and M Rahman, “Fabrication of complex shape electrodes by localized electrochemical deposition”. Journal of Materials Processing Technology, 209, no. 2  (2009): 4453‑4458.
  76. TANVEER, S, B INDRANEEL and M Rahman, “Efficient dressing of the whel in ELID grinding by contrallable voltage with force feed back”. International Journal of Advanced Manufacturing Technology, 46, no. 1‑4  (2009): 123‑130.
  77. WOON, K S, M Rahman and K Liu, “Numerical and experimental analysis of the tool edge radius effect in micro machining of ferrous materials”. International Journal of Nanomanufacturing, 3, no. 3  (2009): 189‑211.
  78. MUHAMMAD, P J, Y S Wong and M Rahman, “A comparative study on the performance of sinking and milling micro‑EDM for nanofinishing of Tungsten Carbide”. International Journal of Nanomanufacturing, 6, no. 1/2/3/4  (2009): 190 ‑ 206.
  79. MUHAMMAD, P J, Y S Wong and M Rahman, “Effect of non‑electrical and gap control parameters in the micro‑EDM of WC‑Co”. Journal of Machining & Forming Technologies, 1/2  (2009): 50‑76.  (Others).
  80. Wong, Y S, P J MUHAMMAD, M A MOHAMMED and M Rahman, “A comparative experimental investigation of deep‑hole micro‑EDM drilling capability for cemented carbide (WC‑Co) against austenitic stainless steel (SUS 304)”. International Journal of Advanced Manufacturing Technology, 46, no. 9‑12  (2009): 1145‑1160.
  81. CHANDRA, N, M Rahman and K S Neo, “A study on the effect of tool nose radius in ultrasonic elliptical vibration cutting of tungsten carbide”. Journal of Materials Processing Technology, 209, no. 17  (2009): 5830‑5836.
  82. CHANDRA, N, M Rahman and K S Neo, “A study on ultrasonic elliptical vibration cutting tungsten carbide”. Journal of Materials Processing Technology, 209  (2009): 4459‑4464.
  83. Pramanik, A, K S Neo, M Rahman, X P Li, M Sawa and Y Meada, “Ultra–Precision Turning of Electroless–Nickel: Effect of Phosphorus Contents, Depth–of–cut and Rake Angle”. Journal of Materials Processing Technology,  208  (2008): 400‑408.
  84. Pramanik, A., K S Neo, M Rahman, X P Li, M. Sawa and Y. Maeda, “Ultra‑precision turning of electroless‑nickel: Effect of phosphorus contents, depth‑of‑cut and rake angle”. Journal of Materials Processing Technology,  208, no. 1‑3  (2008): 400‑408.
  85. MUHAMMAD, P J, Y S Wong and M Rahman, “A Comparative Study of Transistor and RC Pulse Generators for Micro‑EDM of Tungsten Carbide”. International Journal of Precision Engineering and Manufacturing, 9, no. 4  (2008): 3‑10.
  86. WOON, K S, M Rahman, K S Neo and K Liu, “The effect of tool edge radius on the contact phenomenon of tool‑based micromachining”. International Journal of Machine Tools & Manufacture, 48, no. 12‑13  (2008): 1395‑1407.
  87. INDRANEEL, B, M Rahman, H S Lim and S TANVEER, “In‑process Truing of Metal‑bonded Diamond Wheels for Electrolytic In‑process Dressing (ELID) Grinding”. International Journal of Precision Engineering and Manufacturing, 2, no. 9  (2008).
  88. MOHAMMAD, S R, S TANVEER, S M Son, H S Lim and M Rahman, “Development of an on‑machine profile measurement system in ELID grinding for machining aspheric surface with software compensation”. International Journal of Machine Tools & Manufacture, 48, no. 7‑8  (2008): 887‑895.
  89. CHANDRA, N, M Rahman and K S Neo, “Evaluation of ultrasonic vibration cutting for machining Inconel 718”. International Journal of Precision Engineering and Manufacturing, 9, no. 3  (2008): 12‑17.
  90. TANVEER, S, B INDRANEEL, H S Lim and M Rahman, “In‑process Truing of Metal‑bonded Diamond Wheels for Electrolytic In‑process Dressing (ELID) Grinding”. IEEE Transactions on Automation Science and Engineering, 8, no. 2  (2008): 338‑346.
  91. WOON, K S and M Rahman, “Investigations of edge radius effect in micromachining: A FEM simulation approach”. Journal of Materials Processing Technology, 195, no. 1‑3  (2008): 205‑211.
  92. Woon, K S, M Rahman, F Z Fang, K S Neo and K Liu, “Investigations of tool edge radius effect in micromachining:a FEM simulation approach”. Journal of Materials Processing Technology, 195, no. 1‑3  (2008).
  93. Liu, K, X P Li and M Rahman, “Characteristics of Ultrasonic Vibration Assisted Ductile Mode Cutting of Tungsten Carbide”. International Journal of Advanced Manufacturing Technology, 35, no. 7‑8  (2008): 833‑841.
  94. Rahman, M, “Numerical and Experimental Analysis of the Tool Edge Radius Effect in Micromachining of Ferrous Materials”. International Journal of Nanomanufacturing, 48, no. 12‑13  (2007): 1395–1407.
  95. Rahman, M, A Pramanik, K S Neo, X P Li, M Sawa and Y Meada, “Effects of workpiece composition and depth–of–cut on the artificial diamond cutters during ultra–precision machining of electroless–nickel in long cutting distance”. International Journal for Manufacturing Science & Technology,  9, no. 1  (2007): 59‑68.
  96. TANVEER, S, S R MOHAMMAD, H S Lim and M Rahman, “Development and performance evaluation of an ultra precision ELID grinding machine”. Journal of Materials Processing Technology, 192‑193  (2007).
  97. CHANDRA, N, M Rahman and S S K Andrew, “A study on ultrasonic vibration cutting of low alloy steel”. Journal of Materials Processing Technology, 192‑193  (2007): 159‑165.
  98. Cai, M B, X P Li and M Rahman, “High‑pressure phase transformation as the mechanism of ductile chip formation in nanoscale cutting of silicon wafer”. Proceedings of the Institution of Mechanical Engineers Part B‑Journal of Engineering Manufacture, 221  (2007): 1511‑1519.
  99. Cai, M B, X P Li and M Rahman, “Study of the temperature and stress in nanoscale ductile mode cutting of silicon using molecular dynamics simulation”. Journal of Materials Processing Technology, 192‑193  (2007): 607‑612.
  100. Cai, M B, X P Li and M Rahman, “Characteristics of “dynamic hard particles” in nanoscale ductile mode cutting of monocrystalline silicon with diamond tools in relation to tool groove wear”. Wear,  263, no. 7‑12  (2007): 1459‑1466.
  101. Li, X P, M CAI and M Rahman, “NANOSCALE CUTTING OF MONOCRYSTALLINE SILICON USING MOLECULAR DYNAMICS SIMULATION”. Chinese Journal of Mechanical Engineering (English Edition), 20, no. 4  (2007).
  102. LIM, C S, MH Hong, Y LIN, Guoxin Chen, A Senthil kumar, M Rahman and Gnian Cher Lim, “Sub‑Micron surface Nanopatterning by laser irradiation through Microlens Arrays”. Journal of Materials Processing Technology,  192‑193  (2007): 328‑333.
  103. Lim, H S, S M SON, Y S Wong and M Rahman, “Development and evaluation of an on‑machine optical measurement device”. International Journal of Machine Tools & Manufacture, 47, no. 10  (2007): 1556‑1562.
  104. SON, S M, H.S Lim, A Senthil kumar and M Rahman, “Influences of pulsed power condition on the machining properties in micro EDM”. Journal of Materials Processing Technology,  190, no. 1‑3  (2007).
  105. Biddut, A. K., M Rahman, K S Neo, K. M. R. Rahman, M. Sawa and Y. Maeda, “Performance of single crystal diamond tools with different rake angles during micro‑grooving in electro‑less nickel plated die materials”. International Journal of Advanced Manufacturing Technology, 33, no. 9‑10  (2007): 891‑899.
  106. GAN, S.W., H S Lim, M Rahman and F Watt, “A fine tool servo system for global position error compensation for a miniature ultra‑precision lathe”. International Journal of Machine Tools & Manufacture, 47, no. 7‑8  (2007): 1302‑1310.
  107. Li, X P, S Arefin, M B Cai, M Rahman, K Liu and A A O Tay, “Effect of Cutting Edge Radius on Machined Surface in Nanoscale Ductile Mode Cutting of Silicon Wafer”. Proceedings of the Institution of Mechanical Engineers Part B‑Journal of Engineering Manufacture, 221  (2007): 213‑220.
  108. Liu, K, X P Li, M Rahman, K S Neo and X D Liu, “A study of the effect of tool cutting edge radius on ductile cutting of silicon wafers”. International Journal of Advanced Manufacturing Technology, 32, no. 7‑8  (2007): 631‑637.
  109. Cai, M.B., X P Li and M Rahman, “Study of the mechanism of groove wear of the diamond tool in nanoscale ductile mode cutting of monocrystalline silicon”. Journal of Manufacturing Science and Engineering‑Transactions of the ASME, 129, no. 2  (2007): 281‑286
  110. Uddin, SHARIF, K H W Seah, M Rahman, X P Li and K Liu, “Performance of single crystal diamond tools in ductile mode cutting of silicon”. Journal of Materials Processing Technology,  185, no. 1‑3  (2007): 24‑30.
  111. Cai, M B, X P Li, M Rahman and A A O Tay, “Crack initiation in relation to the tool edge radius and cutting conditions in nanoscale cutting of silicon”. International Journal of Machine Tools & Manufacture, 47, no. 3‑4  (2007): 562‑569.
  112. Arefin, S, X P Li, M Rahman and K Liu, “The Upper Bound of Tool Edge Radius for Nanoscale Ductile Mode Cutting of Silicon Wafer”. International Journal of Advanced Manufacturing Technology, 31  (2007): 655‑662.
  113. ALOKESH, P, K S Neo, M Rahman, Production Engineering Research Laboratory, Hitachi and Production Engineering Research Laboratory, Hitachi, “Effects of Workpiece Composition and Depth‑of‑Cut during Ultra‑Precision Machining of Electroless‑Nickel”. International Journal for Manufacturing Science & Technology,  9, no. 1  (2007): 59‑68.
  114. Cai, M B, X P Li and M Rahman, “Molecular dynamics modelling and simulation of nanoscale ductile cutting of silicon”. International Journal of Computer Applications in Technology, 28, no. 1  (2007): 2‑8.
  115. Wang, Z G, M Rahman and Y S Wong, “High‑Speed Machining of Titanium Alloys”. Machining Science and Technology, (2007).
  116. Rahman, M, T Masaki, ABM Asad, Y S Wong and HS Lim, “Miniaturized Universal Machine Tool for Hybrid Micromachining Process”. International Journal of Electrical Machining, (2007).
  117. Sadiq, M A, H S Lim and M Rahman, “Study of WEDM parameter Phenomena for Micro‑fabrication”. International Journal of Manufacturing Technology and Management, 13, no. 2/3/4  (2006): 226 ‑ 240.
  118. SONTI, S, A Senthil kumar, M Rahman and T MOHAMMED, “Optimization of cutting parameters in micro end milling operations in dry cutting conditions using genetic algorithm”. International Journal of Advanced Manufacturing Technology, 30, no. 11‑12  (2006): 1030‑1039.
  119. Lim, CS, MH Hong, Y Lin, Q Xie, B Lukyanchuk, A Senthil kumar and M Rahman, “Microlens Arrays Fabrication by Laser Interference Lithography for Super Resolution Surface Nanopatterning”. Applied Physics Letters, 89  (2006): 191125.
  120. Sun*, J, Y S Wong, M Rahman, Z G Wang, K S Neo, C H Tan and H Onozuka, “Effects of Coolant Supply Strategies and Cutting Conditions on Tool Life in End Milling Titanium Alloy”. Machining Science and Technology, 10, no. 3  (2006): 355‑370.
  121. MOHAMMAD, M I, A Senthil kumar, M Rahman, H S Lim and B SUBRAMANIAN, “Perfromance Evaluation of a newly developed electrolytic system for stable thinning of silicon wafers”. Thin Solid Films, 504, no. 1‑2  (2006): 15‑19.
  122. Lim, H S, K FATHIMA, M Rahman and A Senthil kumar, “Modeling of ultra‑precision ELID grinding”. Journal of Manufacturing Science and Engineering‑Transactions of the ASME, 129, no. 2  (2006): 296‑302.
  123. Sun, J, Y S Wong, M Rahman and Zhigang Wang, “Effects of Coolant Supply Strategies and Cutting Conditions on Tool Life in End Milling Titanium Alloy”. Machining Science and Technology, 14, no. 11  (2006): 335‑370.
  124. Rahman, M, H S Lim, K S Neo, A Senthil kumar, Y S Wong and X P Li, “Tool‑based nanofinishing and micromachining”. Journal of Materials Processing Technology, 185, no. 1‑3 (Special)  (2006): 2‑16.
  125. Wang, Z. G., M Rahman and Y S Wong, “An overview on high speed machining of titanium alloys”. JSME International Journal. Series C, Dynamics, Control, Robotics, Design and Manufacturing,  49, no. 1  (2006): 11‑20.  (Japan).
  126. Cai, M B, X P Li and M Rahman, “Study of the mechanism of nanoscale ductile mode cutting of silicon using molecular dynamics simualtion”. International Journal of Machine Tools & Manufacture, 47  (2006): 75‑80.
  127. Lim, C.S, MH Hong, A Senthil kumar, M Rahman and X.D Liu, “Fabrication of concave micro lens array using laser patterning and isotropic etching”. International Journal of Machine Tools & Manufacture, 46, no. 5  (2006): 552‑558.
  128. Yong, AYL, K H W Seah and M Rahman, “Performance of cryogenically treated tungsten carbide tools in milling operations”. International Journal of Advanced Manufacturing Technology,  DOI online (Published online)  (2006): DOI:10.1007/s00170‑005‑0379‑0.
  129. Tauhiduzzaman, M, A Senthil kumar, M Rahman and S Sreeram, “A three‑dimensional analytical cutting force model for micro end milling operation”. International Journal of Machine Tools & Manufacture, 46, no. 3‑4  (2006): 353‑366.
  130. Sun, J, G S Hong, Y S Wong, M Rahman and Z Wang, “Effective Training Data Selection in Tool Condition Monitoring System”. International Journal of Machine Tools & Manufacture, 46, no. 2  (2006): 218‑226.
  131. Rahman, K M R, M Rahman, K S Neo, M Sawa and Y Maeda, “Micro grooving on electroless nickel plated materials using single crystal diamond tool”. International Journal of Advanced Manufacturing Technology, 27, no. 9‑10  (2006): 911‑917.
  132. Azizur, RAHMAN, M Rahman, A Senthil kumar, H S Lim and A.B.M.A Asad, “Development of micropin fabrication process using tool based micro‑machining”. International Journal of Advanced Manufacturing Technology, 27, no. 9‑19  (2006): 939‑944.
  133. Ng, C.K, S Melkote, M Rahman and A Senthil kumar, “Experimental study of nano micro scale cutting of aluminium 7075‑T6”. International Journal of Machine Tools & Manufacture, 46, no. 9  (2006): 929–936.
  134. Wang, Z. G., M Rahman, Y S Wong and K S Neo, “Development of Heterogeneous Parallel Genetic Simulated Annealing Using Multi‑Niche Crowding”. International Journal of Computational Intelligence, 3, no. 1  (2006): 55‑62.
  135. Wang, Z.G., M Rahman, Y S Wong and J Sun, “Optimization of multi‑pass milling using parallel genetic algorithm and parallel genetic simulated annealing”. International Journal of Machine Tools & Manufacture, 45, no. 15  (2005): 1726‑1734.
  136. Balakumar, S, H TABASSUMUL, A Senthil kumar, M Rahman and R Kumar, “Wear phenomena in abrasive‑free copper CMP process”. Journal of the Electrochemical Society, 152, no. 11  (2005): G867‑874.
  137. TABASSUMUL, H, B SUBRAMANIAN, A Senthil kumar and M Rahman, “Wear Phenomenan of Copper in Abrasive‑free Chemical Mechanical Planarization Process”. Journal of the Electrochemical Society, 152, no. 11 (2005): G867‑874.
  138. Wang, Z, Y S Wong and M Rahman, “Development of a Parallel Optimization Method based on Genetic Simulated Annealing Algorithm”. Parallel Computing, 31, no. 8‑9 (2005): 839‑857.
  139. Cai, M B, X P Li and M Rahman, “Molecular dynamics simulation of the effect of tool edge radius on cutting forces and cutting region in nanoscale ductile cutting of silicon”. International Journal of Manufacturing Technology and Management, 7, no. 5/6 (2005): 455‑466.
  140. Arefin, S, X P Li, M Rahman and T He, “MACHINED SURFACE AND SUBSURFACE IN RELATION TO CUTTING EDGE RADIUS IN NANOSCALE DUCTILE CUTTING OF SILICON”. Transactions of the North American Manufacturing Research, Institution of SME, 33 (2005): 113‑119.
  141. Zareena, A, M Rahman and Y S Wong, “Binderless CBN Tools, a Breakthrough for Machining Titanium Alloys”. Journal of Manufacturing Science and Engineering‑Transactions of the ASME, 127, no. 1 (2005).
  142. TABASSUMUL, H, S Balakumar, B SUBRAMANIAN, A Senthil kumar and M Rahman, “A material removal rate model for copper abrasive‑free chemical mechanical planarization”. Journal of the Electrochemical Society, 152, no. 6 (2005): G417‑G422.
  143. Sun, J, G S Hong, M Rahman and Y S Wong, “Improved performance evaluation of tool condition identification by manufacturing loss consideration”. International Journal of Production Research, 43, no. 6  (2005): 1185‑1204.
  144. Thet, N T, S L Toh, C J Tay, R Akkipeddi and M Rahman, “Contact pressure measurement using silicon‑based AlxGa1‑xAs semiconductor pressure sensors”. Sensors and Actuators A‑Physical, 118, no. 2  (2005): 190‑201.
  145. Li, X P, T He and M Rahman, “Tool wear characteristics and their effects on nanoscale ductile mode cutting of silicon wafer”. Wear, 259  (2005): 1207‑1214.
  146. Wang, Z, M Rahman, Y S Wong and X P Li, “A Hybrid Cutting Force Model for High‑speed Milling of Titanium Alloys”. CIRP Annals‑Manufacturing Technology, 54, no. 1  (2005): 71‑74.
  147. Wang, Z G, M Rahman and Y S Wong, “Tool wear characteristics of binderless CBN tools used in high‑speed milling of titanium alloys”. Wear, 258 (2005): 752‑758.
  148. Wang, Z.G., Y S Wong and M Rahman, “High Speed Milling of Titanium Alloys using Binderless CBN Tools”. International Journal of Machine Tools & Manufacture, 45  (2005): 105‑114.
  149. Rahman, M. AZIZUR, M Rahman, A Senthil kumar and H S Lim, “CNC microturning: an application to miniaturization”. International Journal of Machine Tools & Manufacture, 45  (2004): 631‑639.
  150. Sun, J, M Rahman, Y S Wong and G S Hong, “Multiclassification of tool wear with support vector machine by manufacturing loss consideration”. International Journal of Machine Tools & Manufacture, 44, no. 11  (2004): 1133‑1245.
  151. Sun, J, G S Hong, M Rahman and Y S Wong, “Identification of feature set for effective tool condition monitoring by acoustic emission sensing”. International Journal of Production Research, 42, no. 5  (2004): 901‑918.
  152. Liu, K, X P Li, M Rahman and X D Liu, “Study of ductile mode cutting in grooving of tungsten carbide with and without ultrasonic vibration”. International Journal of Advanced Manufacturing Technology, 24, no. 5‑6  (2004): 389‑394.
  153. Liu, K, T He, X P Li and M Rahman, “A method of atomic dynamic modeling for nanometic ductile cutting of silicon wafer material”. International Journal for Manufacturing Science & Technology, (2004).
  154. Uddin, SHARIF, K H W Seah, X P Li, M Rahman and K Liu, “Effect of crystallographic orientation on wear of diamond tools for nanoscale ductile cutting of silicon”. Wear,  257, no. 7‑8  (2004): 751‑759
  155. Wang, Z. G., Y S Wong and M Rahman, “Optimization of multi‑pass miling using genetic algorithm and simulated genetic annealing”. International Journal of Advanced Manufacturing Technology, 24  (2004): 727‑732.
  156. Liu, K, X P Li, M Rahman and X.D Liu, “A study of the cutting modes in the grooving of tungsten carbide”. International Journal of Advanced Manufacturing Technology, 24, no. 5‑6  (2004): 321‑326.
  157. Rahman, M, A Senthil kumar, H S Lim and K Fathima, “ELID grinding technique for nano finishing of brittle materials”. Sadhana‑Academy Proceedings in Engineering Sciences, 28, no. 5  (2003): 957‑974.
  158. Pramanik, A, M Rahman, K S Neo, X P Li, M Sawa and Y Meada, “Cutting performance of diamond tools during ultra–precision turning of electroless nickel plated die materials”. Journal of Materials Processing Technology, 140, no. 1‑3  (2003): 308‑313.
  159. Liu, K, X P Li and M Rahman, “Characteristics of high speed micro ductile cutting of tungsten carbide”. Journal of Materials Processing Technology, 140, no. 1‑3  (2003): 352‑357.
  160. Li, X P, M Rahman, K Liu, K S Neo and C C Chan, “Nanoprecision measurement of diamond tool edge radius for wafer fabrication”. Journal of Materials Processing Technology, 140 (2003): 358‑362.
  161. Lim, H S, Y S Wong, M Rahman and E M K Lee, “A study on the machining of high‑aspect ratio micro‑structures using micro‑EDM.”. Journal of Materials Processing Technology, 140 (2003): 318‑325.
  162. Wong, Y S, M Rahman, H S Lim, HAN Huang and NACHIAPPAN Ravi, “Investigation of micro‑EDM material removal mechanism using single RC pulse discharge”. Journal of Materials Processing Technology, 140  (2003): 303‑305.
  163. Liu, K, X P Li and M Rahman, “Characteristics of high‑speed micro‑cutting of tungsten carbide”. Journal of Materials Processing Technology, (2003).
  164. Alam, M R, K S Lee, M Rahman and Y F Zhang, “Process planning optimization for the manufacture of injection moulds using a genetic algorithm”. International Journal of Computer Integrated Manufacturing, 16, no. 3  (2003): 181‑191.
  165. Neo, K S, M Rahman, X P Li, M Sawa and Y Maeda, “Performance evaluation of pure CBN tools for machining of steel”. Journal of Materials Processing Technology, (2003).
  166. Pramanik, A, K S Neo, M Rahman, X P Li, M Sawa and Y Maeda, “Cutting performance of diamond tools during ultra‑precision turning of electroless nickel plated die materials”. Journal of Materials Processing Technology, (2003).
  167. Fathima, K, A Senthil kumar, M Rahman and H S Lim, “A study on wear mechanism and wear reduction strategies in grinding which used for ELID grinding”. Wear, (2003): 1247‑1255.
  168. Seah, K H W, M Rahman and K H Yong, “Performance evaluation of cryogemically treated tungsten carbide cutting tool inserts”. Proceedings of the Institution of Mechanical Engineers Part B‑Journal of Engineering Manufacture,  217  (2003): 29‑43.
  169. Baidya, K P, S Ramakrishna, M Rahman, A Richie and Z M Huang, “An investigation on the polymer composite medicat device ‑ external fixator”. Journal of Reinforced Plastics and Composites, 22, no. 6  (2003): 563‑590.
  170. Rahman, M, Y S Wong and A R Zareena, “Machinability of titanium alloys”. JSME International Journal. Series C, Dynamics, Control, Robotics, Design and Manufacturing, 46, no. 1  (2003): 107‑114.
  171. Rahman, M, A Senthil kumar, M Salam and M S Ling, “Effect of chilled air on machining performance in end milling”. International Journal of Advanced Manufacturing Technology, (2003).
  172. Prakash, J R S, M Rahman and A Senthil kumar, “Effect of micro end‑mill on machining copper”. Journal of Materials Processing Technology, (2003).
  173. Prakaksh, J R S, M Rahman and A Senthil kumar, “A model for predicting tool life in micro milling of copper”. Chinese Journal of Materials Research, (2002).
  174. Lim, H S, A Senthil kumar and M Rahman, “Improvement of form accuracy in hybrid machining of microstructure”. Journal of Electronic Materials, 31, no. 10  (2002): 1032‑1038.
  175. Senthil kumar, A, H S Lim, M Rahman and K Fathima, “A study on the grinding of glass using electrolytic in process dressing”. Journal of Electronic Materials, 31, no. 10  (2002): 1039‑1046.
  176. Lim, H S, K Fathima, A Senthil kumar and M Rahman, “A fundamental study on the mechanism of electrolytic in‑process dressing (ELID) grinding”. International Journal of Machine Tools & Manufacture, 42, no. 8  (2002): 935‑943.
  177. Alam, M R, K S Lee, M Rahman and K S Sankaran, “Decision Algorithm for selection of high speed machining, EDM or a combination for the manufacturing of Injection Moulds.”. International Journal of Production Research, 40, no. 4  (2002): 845‑872.
  178. Senthil kumar, A, M Rahman and S L Ng, “Effect of high pressure coolant on machining performance”. International Journal of Advanced Manufacturing Technology, 20  (2002): 83‑91.
  179. Rahman, M, A Senthil kumar and M Salam, “Experimental evaluation of the effect of minimal quantities of lubricant in milling”. International Journal of Machine Tools & Manufacture, 42  (2002): 539‑547.
  180. Rahman, M, M A Mansur and S H Lau, “Tool wear study in a lathe made of cementitions material”. Journal of Materials Processing Technology, 113, no. 1 ‑ 3  (2001): 317‑321.
  181. Lim, L H, S Balakumar, S Mahedevan, M S Zhou, M Rahman and A Senthil kumar, “Dishing and nitride erosion of STI‑CMP for different integration schemes”. Journal of Electronic Materials, 30  (2001): 1478‑1482.
  182. Lee, K S, C Y Low, M Rahman and Y F Zhang, “A Genetic Algorithm Based Process Planning System for Mould Base.”. International Journal of Computer Applications in Technology,  14, no. (4‑6)  (2001): 190‑203.
  183. Rahman, M, M A Mansur, L K Lee and J K Lum, “Development of a polymer inpregenated concrete damping carriage for linear guideways for machine tools”. International Journal of Machine Tools & Manufacture, 41  (2001): 431‑441.
  184. Yuan, N, M Rahman and Y S Wong, “Investigation of chip formation in high speed end milling”. Journal of Materials Processing Technology, 113, no. 1‑3  (2001): 360‑367.
  185. Rahman, M, A Senthil kumar and M‑U Salam, “Evaluation of minimal quantities of lubricant in end milling”. International Journal of Advanced Manufacturing Technology, 18, no. 4  (2001): 235‑241.
  186. Rahman, M, M A Mansur and M B Karim, “Non‑conventional materials for machine tool structures”. JSME International Journal. Series C, Dynamics, Control, Robotics, Design and Manufacturing, 44, no. No 1  (2001): 1‑11.
  187. Krishna, P B, S Ramakrishna, M Rahman and A Ritchie, “Quantitative radiographic analysis of fiber reinforced polymer composites”. Journal of Biomaterials Applications, 15, no. 3  (2001): 279‑289.
  188. Rahman, M, A Senthil kumar and J R S Prakash, “Micro milling of pure copper”. Journal of Materials Processing Technology,  116  (2001): 39‑43.
  189. Ting, Y P, A Senthil kumar, M Rahman and B K Chia, “Innovative use of thiobacillus ferrooxidans for the biological machining of metals”. Acta Biotechnologica, 20  (2000): 87‑96.
  190. Tay, E H, E A Haider and M Rahman, “Manufacture of RP tools with high quality surface finish and strength using high temperature epoxy resin and electroless nickel plating”. Surface Engineering, 16, no. 3  (2000): 250‑252.
  191. Lee, K S, M R Alam, M Rahman and Y F Zhang, “Automated process planning for the manufacture of lifters”. International Journal of Advanced Manufacturing Technology, 17  (2000): 727‑734.
  192. Rahman, M, A Senthil kumar and M R Choudhury, “Identification of effective zones for high pressure coolant in milling”. CIRP Annals‑Manufacturing Technology, 48, no. 1  (2000): 47‑52.
  193. Toh, S L, C J Tay, S‑H Ng and M Rahman, “Alsubx#Ga#sub 1‑x#As semiconductor sensor for contact pressure measurement”. Sensors and Actuators,  79  (2000): 31‑35.
  194. Alam, M R, K S Lee, M Rahman and Y F Zhang, “Automated process planning for the manufacturing of sliders”. Computers in Industry, 43  (2000): 249‑262.
  195. Goh, G K L, L C Lim, M Rahman and S C Lim, “Effect of grain size on wear behaviour of alumina cutting tools”. Wear, 206  (1997): 24‑32.
  196. Rahman, M, K H W Seah and T T Teo, “The machinability of Inconel 718”. Journal of Materials Processing Technology,  63, no. 1‑3  (1997): 199‑204.
  197. Goh, G K L, L C Lim, M Rahman and S C Lim, “Transition in wear mechanisms of alumina cutting tools”. Wear, 201  (1996): 199‑208.
  198. Yeo, S H and M Rahman, “Performance evaluation of shank‑type tooling and modular tooling for lathes”. Journal of Materials Processing Technology, 62  (1996): 335‑343.
  199. Rahman, M, K H W Seah, C H Lee and T N Goh, “Effectiveness of various coatings on cermet cutting tools”. Journal of Materials Processing Technology,  58, no. 4  (1996): 368‑373
  200. Seah, K H W, M Rahman, X P Li and X D Zhang, “A three dimensional model of chip flow, chip curl and chip breaking for oblique cutting”. International Journal of Machine Tools & Manufacture,  36, no. 12  (1996): 1385‑1400.
  201. Hong, G S, M Rahman and Q Zhou, “Using neural Network for tool condition monitoring based on wavelet decomposition”. International Journal of Machine Tools & Manufacture, 36, no. 5  (1996): 551‑556.
  202. Rahman, M, G S Hong and Q Zhou, “On‑line cutting state recognition using neural network”. International Journal of Advanced Manufacturing Technology, (1995): 87‑92
  203. Yeo, S H, M Rahman and Y S Wong, “A tandem approach to selection of machinability data”. International Journal of Advanced Manufacturing Technology, 10  (1995): 79‑86.
  204. Seah, K H W, M Rahman, T N Goh and C H Lee, “Comparing the effectiveness of coatings on carbide and cermet cutting tool inserts”. Journal of Materials Science & Technology,  11, no. 4  (1995): 269‑275.
  205. Rahman, M, M A Mansur and F Zhou, “Design, fabrication and evaluation of a steel fibre reinforced concrete column for grinding machines”. Materials & Design, 16, no. 4  (1995): 205‑209.
  206. Zhou, Q, G S Hong and M Rahman, ” New tool life criterion for tool condition monitoring using neural network”. Engineering Applications of Artificial Intelligence, 8, no. 5  (1995): 579‑588.
  207. Rahman, M, K H W Seah, X P Li and X D Zhang, “A three dimensional model of chip flow, chip curl and chip breaking under the concept of equivalent parameters”. International Journal of Machine Tools & Manufacture,  35, no. no .7  (1995): 1015‑1031.
  208. Rahman, M and M Tsutsumi, “Effect of spindle speed on clamping force in turning”. Journal of Materials Processing Technology, 38, no. 1‑2, part. B  (1993): 407‑415.
  209. Rahman, M and M A Mansur, “Evaluation of a lathe with ferrocement bed”. CIRP Annals‑Manufacturing Technology, 42, no. 1  (1993): 437‑440.
  210. Goh, T N, M Rahman, K H W Seah and C H Lee, “Influence of substrate material on the effectiveness of coatings in metal‑cutting”. Journal of Materials Processing Technology,  37  (1993): 655‑665.
  211. Chua, M S, M Rahman, Y S Wong and H T Loh, “Determination of optimal cutting conditions using design of experiments and optimisation techniques”. International Journal of Machine Tools & Manufacture, 33, no. 2  (1993): 297‑305.
  212. Rahman, M, M A Matin and K H W Seah, “A study of the vibrational dynamics of an endrill clamped by side‑locking”. ASME Journal of Engineering for Industry. (ser.B),  115, no. 4  (1993): 438‑443.
  213. Rahman, M, H Shinno and C Inaba, “In‑process monitoring system for machining environment based on heat flux sensing”. JSME International Journal. Series III, Vibration, Control Engineering, Engineering for Industry, 35, no. 2  (1992): 307‑312.
  214. Rahman, M and M A Mansur, “Fibre reinforced concrete ‑ A new material for machine tools”. International Journal of the Japan Society for Precision Engineering, 26, no. 3  (1992): 183‑188.
  215. Lim, F S, Y S Wong and M Rahman, “Circular interpolators for numerical control: A comparison of the modified DDA techniques and an LSI interpolator”. Computers in Industry, 18  (1992): 41‑52.
  216. Rahman, M, K H W Seah, T N Goh and C H Lee, “A study on the appropriate usage of different tool materials”. Journal of Materials Processing Technology,  29  (1992): 119‑132.
  217. Rahman, M, “Effect of clamping on roundness profile of a machined workpiece”. International Journal of the Japan Society for Precision Engineering, 27, no. 3  (1993): 203‑207.
  218. Rahman, M, K H W Seah, C H Lee and T N Goh, “Performance evaluation of various tool materials used in turning”. Journal ‑ The Institution of Engineers (Singapore),  31, no. 3  (1991): 33‑38.
  219. Yeo, S H, Y S Wong and M Rahman, “Knowledge‑based system in machining domain”. Advanced Manufacturing Engineering, 6  (1991): 35‑44.
  220. Yeo, S H, Y S Wong and M Rahman, “Integrated knowledge‑based machining system for rotational parts”. International Journal of Production Research, 29, no. 7  (1991): 1325‑1337.
  221. Chua, M S, H T Loh, Y S Wong and M Rahman, “Optimisation of cutting conditions for multi‑pass turning operations using sequential quadratic programming”. Journal of Materials Processing Technology, 28, no. 1‑2  (1991): 253‑262.
  222. Rahman, M and M A Matin, “Effect of tool nose radius on stability of turning processes”. Journal of Materials Processing Technology, 26  (1991): 13‑21.
  223. Rahman, M, H Shinno and K J Huang, “In‑process tool wear monitoring by heat flux sensor”. Transactions of the Japan Society of Mechanical Engineers, 57, no. 538  (1991): 359‑363.
  224. Yeo, S H, M Rahman and Y S Wong, “Frame‑based approach for hole‑making of turned parts and its further development”. Journal of Materials Processing Technology, 23, no. 2  (1990): 149‑162.
  225. Rahman, M and M A Mansur, “Development and evaluation of ferrocement legs for a lathe”. International Journal of Machine Tools & Manufacture, 30, no. 4  (1990): 629‑636.
  226. Lim, F S, Y S Wong and M Rahman, “Design and development of a PC‑based CNC system using LSI chips”. Journal ‑ The Institution of Engineers (Singapore), 30, no. 1  (1990): 63‑69.
  227. Hawlader, M N A, M A Mansur and M Rahman, “Thermal behaviour of ferrocement”. Journal of Ferrocement, 20, no. 3  (1990): 231‑239.
  228. Rahman, M, “A study on the deviation of a shape of turned workpiece clamped by multiple jaws”. CIRP Annals‑Manufacturing Technology, 38/1  (1989): 385‑388.
  229. Yeo, S H, M Rahman and Y S Wong, “Towards enhancement of machinability data by multiple regressions”. Journal of Mechanical Working Technology, 19, no. 1  (1989): 85‑100.
  230. Rahman, M, “Analysis of the cutting process of a cylindrical workpiece clamped by a four jaw chuck”. Journal of Mechanical Working Technology, 19, no. 1  (1989): 73‑84.
  231. Mansur, M A and M Rahman, “Ferrocement as a machine tool bed”. Journal of Ferrocement, 18, no. 1  (1989): 9‑28.
  232. Matin, M A and M Rahman, “Analysis of the cutting process of a cylindrical workpiece clamped by a three‑jaw chuck”. ASME Journal of Engineering for Industry. (ser.B), 110  (1988): 326‑332.
  233. Narayanan, V and M Rahman, “Manufacturing information processing for automation”. Journal ‑ The Institution of Engineers (Singapore), 28, no. 4  (1988): 59‑66.
  234. Rahman, M, M A Mansur and K H Chua, “A study on the application of cementitious materials for machine tool structures”. Bulletin of the Japan Society of Precision Engineering, 23, no. 2  (1989): 94‑99.
  235. Rahman, M, K H Chua, K H W Seah and K S Lee, “A study on the importance of dynamic rigidity in step turning”. Journal of Mechanical Working Technology,  17  (1988): 257‑266.
  236. Yeo, Y S, M Rahman and V C Venkatesh, “Development of an expert system for machinability data selection”. Journal of Mechanical Working Technology, (1988): 51‑60
  237. Rahman, M, M A Mansur and K H Chua, “Evaluation of advanced cementitious composites for machine tool structures”. CIRP Annals‑Manufacturing Technology, 37/1  (1988): 373‑376.
  238. Rahman, M, K H W Seah and V C Venkatesh, “Performance evaluation of endrills”. International Journal of Machine Tools & Manufacture,  28, no. 4  (1988): 341‑349.
  239. Rahman, M, “In‑process detection of chatter threshold”. ASME Journal of Engineering for Industry. (ser.B), 110  (1988): 44‑50.
  240. Rahman, M and V Narayanan, “An expert system for process planning”. Robotics and Computer‑Integrated Manufacturing, 3, no. 3  (1987): 365‑372.
  241. Rahman, M, M A Mansur, W D Ambrose and K H Chua, “Design, fabrication and performance of a ferrocement machine tool bed”. International Journal of Machine Tools & Manufacture, 27, no. 1  (1987): 431‑442.
  242. Lee, K S, Y S Wong, V C Venkatesh, A Y C Nee, K H W Seah, M Rahman and A N Poo, “Singapore’s manufacturing sector: Performance and potential”. Journal ‑ The Institution of Engineers (Singapore),  27, no. 3  (1987): 72‑80.
  243. Chua, K H, M Rahman and M A Mansur, “Performance evaluation of machine tool structures using modal analysis”. The International Journal of Analytical and Experimental Modal Analysis, 2, no. 1  (1987): 43‑49.
  244. Rahman, M, “Factors affecting the machining accuracy of a chucked workpiece”. Precision Engineering ‑ Journal of the International Societies for Precision Engineering and Nanotechnology, 8, no. 1  (1986): 34‑40.
  245. Rahman, M and Y Ito, “Detection of the onset of chatter vibration”. Journal of Sound and Vibration, 109, no. 2  (1986): 193‑205.
  246. Rahman, M and V Narayanan, “Optimisation of error‑of‑roundness in turning processes”. CIRP Annals‑Manufacturing Technology, 35/1  (1986): 377‑380.
  247. Rahman, M and Y Ito, “Stability analysis of chatter vibration in turning processes”. Journal of Sound and Vibration, 102, no. 4  (1985): 515‑525.
  248. Rahman, M, “Effect of clamping conditions on chatter stability in turning processes”. CIRP Annals‑Manufacturing Technology, 34/1  (1985): 339‑342.
  249. Rahman, M and Y Ito, “Some necessary considerations for the dynamic performance test proposed by the MTIRA”. International Journal of Machine Tool Design & Research, 21, no. 1  (1981): 1‑10.
  250. Rahman, M and Y Ito, “Machining accuracy of a workpiece held in a three‑jaw chuck”. Bulletin of the Japan Society of Precision Engineering, 13, no. 1  (1979): 7‑12.
  251. Rahman, M, “Present state of dynamic performance test of machine tools and problems associated with it”. Machinist, 22, no. 1  (1978): 52‑63.
  252. Ito, Y and M Rahman, “Evaluation of dynamic performance of machine tools through direct cutting tests”. JSME International Journal, (1978): 27‑43.

 

 

 

 

 

List of Keynote, Plenary and Invited Papers

  1. ARIF, M, M Rahman and Y S Wong, “A state‑of‑the‑art review of ductile cutting of silicon wafers for semiconductor and microelectronics industries”. International Journal of Advanced Manufacturing Technology, part. 10.1007/s00170‑012‑3937‑2  (2012).
  2. MUHAMMAD, P J, M Rahman and Y S Wong, “A review on the conventional and micro electro discharge machining of tungsten carbide”. International Journal of Machine Tools & Manufacture,  51, no. 12  (2011): 837‑858.  (United Kingdom).  (Ranked #7 in the SciVerse ScienceDirect Top 25 Hottest Article (Engineering) in International Journal of Machine Tools and Manufacture, October to December, 2011).
  3. MUHAMMAD, P J, M Rahman and Y S Wong, “Study on the nano‑powder‑mixed sinking and milling micro‑EDM of WC‑Co”. International Journal of Advanced Manufacturing Technology,  53, no. 1‑4  (2011): 167‑180.
  4. Wang, Z. G., M Rahman and Y S Wong, “An overview on high speed machining of titanium alloys”. JSME International Journal. Series C, Dynamics, Control, Robotics, Design and Manufacturing,  49, no. 1  (2006): 11‑20.  (Japan).
  5. Rahman, M, A Senthil kumar and J R S Prakash, “Micro milling of pure copper”. Journal of Materials Processing Technology,  116  (2001): 39‑43.
  6. Rahman, M, M A Mansur and K H Chua, “A study on the application of cementitious materials for machine tool structures”. Bulletin of the Japan Society of Precision Engineering,  23, no. 2  (1989): 94‑99.
  7. Rahman, M, M Arif, K S Woon, M D Ngyuen, Y S Wong and A Senthil kumar, “Recent Advances in Machining Technologies to Generate Nano Finished Surfaces on Difficult‑to‑Machine Materials”. Proceedings of the International Workshop on Near Net and Net Shape Manufacturing 2014 (2014).  Kolkata: Central Glass & Ceramics Research Institute.  (Keynote paper)  (12 ‑ 13 Jun 2014, Central Glass & Ceramics Research Institute, Kolkata, India)
  8. Rahman, M, K S Woon, M ARIF, W K NEO, M D NGUYEN, Y S Wong and A Senthil kumar, “Quantum Leap Towards Revolutionary Nano Surface Generation by Tool‑Based Machining Technologies”. Proceedings of the International Conference on Precision Engineering & Nano Technology 2013 (COPEN2013) (2013).  Kalicut: COPEN2013.  (Keynote paper)  (International Conference On Precision Engineering & Nano Technology 2013 (COPEN2013), 13 ‑ 16 Dec 2013, NIT Kalicut, Kalicut, India).
  9. Rahman, M, M D NGUYEN, B M A A ABU, K S Woon and M ARIF, “Ultra‑precision Machining of Die and Mold Materials”. Proceedings of the International Conference on Precision Die and Mold Machining 2012 (2012).  Lucknow: CIPET 2012.  (Keynote paper)  (24 Dec 2012, CIPET Institute, Lucknow, Lucknow, India.
  10. Woon, K, M ARIF, M Rahman, A Senthil kumar, M D NGUYEN and Y S Wong, “Recent Advances in Nano Surface Generation by Tool‑Based Machining Technologies”. Proceedings of the International AIMTDR 2012 (2012).  Kolkata: AIMTDR.  (Keynote paper)  (12 ‑ 16 Dec 2012, Jadavput University, Kolkata, India)
  11. WOON, K S, Y S Wong, M ARIF and M Rahman, “Ductile mode micro‑milling of brittle materials”. Proceedings of ASPEN 2011, ed. W. B. Lee (2011).  Hong Kong: ASPEN.  (Asian Society for Precision Engineering and Nano Technology (ASPEN), 16‑18 Nov.2011, 16 ‑ 18 Nov 2011, Hong Kong Polytechnic University, Hong Kong)  (Keynote paper).
  12. Rahman, M, “Why I chose Japan for Study and what is the outcome of this decision”. Proceedings of the International Conference of JSME 2011 (2011).  Tokyo: JSME.  ( 9 ‑ 11 Sep 2011, Tokyo Institute of Technology, Tokyo, Japan)  (Invited paper).
  13. ARIF, M, M Rahman and Y S Wong, “Fracture‑free precision machining of tungsten carbide by end‑milling”. Proceedings of 11th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN) (2011).  Como: Euspen.  (Plenary paper)  (The European Society for Precision Engineering and Nanotechnology (EUSPEN), 23 ‑ 25 May 2011, The Spazio Villa Erba Congress Centre, Como, Italy).
  14. Rahman, M, “Ductile Mode Machining of Glass by Endmilling”. The Proceedings of MTTRF 2010 Meeting (2010).  San Francisco: MTTRF 2010.  (Machine4 Tool Technologies Research Foundation,  7 ‑  8 Jul 2010, InterContinental Mark Hopkins Hotel, San Francisco, United States).
  15. Rahman, M, “Compound/Hybrid Micro‑Machining – A tool‑based innovative and Integrated Approach”. Proceedings of 13th International Conference on Precision Engineering (2010).  Singapore: JSPE‑SIMTech.  (Keynote paper)  (13th International Conference on Precision Engineering, 28 ‑ 30 Jul 2010, JSPE‑SIMTech, Singapore).
  16. Rahman, M, “Development of a Multi‑Process Machine Tool for Compound/Hybrid Micro Machining”. Proceedings of International Conference Process Machine Interactions (2010).  Vancouver, BC: CIRP.  (Keynote paper)  (2nd International Conference Process Machine Interactions, 10 ‑ 11 Jun 2010, The University of British Columbia, Vancouver, BC, Canada).
  17. Rahman, M, “An Innovative and Integrated Research Approach for Compound Micro/ Nano Machining”. National Conference On Advanced Manufacturing And Material Engineering 2010 (NAMME 2010). (2010).  Batu Pahat: Universiti Tun Hussein Onn Malaysia.  (Keynote paper)  (24 ‑ 27 May 2010, Universiti Tun Hussein Onn Malaysia, Batu Pahat, Malaysia).
  18. Rahman, M, “Engineering Education for Sustainable Development”. Engineering Education for Sustainable Development (2009).  Dhaka: World University of Bangladesh.  (Keynote paper)  (Engineering Education for Sustainable Development, 19 ‑ 20 Dec 2009, World University of Bangladesh, Dhaka, Bangladesh).
  19. NATH, C, M Rahman and K S Neo, “Ductile mode machining of tungsten carbide using ultrasonic elliptical vibration cutting technique”. Proceedings of ASPEN 2009 (2009).  Tokyo: JSPE.  (Invited paper)  (3rd Asian Symposium for Precision Engineering and Nanotechnology (ASPEN),  9 ‑ 11 Dec 2009, Kitakhyushu, Japan)  (Invited paper).
  20. ASMA, P, M Rahman and Y S Wong, “Comparative Micro‑grinding performance of BK‑7, Lithosil and NSF14 glass using on–machine fabricated PCD tool”. Proceeding of 5th international Conference on leading Edge Manufacturing in 21st Century(LEM21) (2009).  Osaka: Japan Society for Precision Engineering.  (international Conference on leading Edge Manufacturing in 21st Century(LEM21),  2 ‑  4 Dec 2009, Osaka University Convention Centre, Osaka, Japan).
  21. Rahman, M, “Compound Micro Machining ‑ A Tool‑based Integrated Approach”. Proceedings of International Conference on Advances in Materials and Processing Technology (AMPT2009) (2009). Malaysia: Advances in Materials and Processing Technology.  (Keynote paper)  (International Conference on Advances in Materials and Processing Technology (AMPT2009), 26 ‑ 29 Oct 2009, Kuala Lumpur, Malaysia).
  22. Rahman, M, “Tool‑based compound micro/nano‑machinining”. Proceedings of The 4M/ICOMM 2009 Conference (2009).  Karlsruhe: The 4M/ICOMM 2009 Conference.  (Keynote paper)  (The 4M/ICOMM 2009 Conference (jointly organised by the International Conference on Multi‑Material Micro‑Manufacture (4M) and the International Conference on Micro‑Manufacture (ICOMM)), 23 Sep 2009, Karlsruhe, Germany).
  23. CHANDRA, N, M Rahman and K S Neo, “Ultraprecision micromachining of tungsten carbide by ultrasonic elliptical vibration cutting technique”. the 2nd International and 23rd All India Manufacturing Technology, Design and Research (AIMTDR), (2008).  Chennai: the 2nd International and 23rd All India Manufacturing Technology, Design and Research (AIMTDR),.  (the 2nd International and 23rd All India Manufacturing Technology, Design and Research (AIMTDR), 15 ‑ 17 Dec 2008, IIT Madras, Chennai, India).
  24. CHANDRA, N and M Rahman, “Evaluation of ultrasonic vibration cutting for machining of Inconel 718”. 2nd International Conference of Asian Symposium for Precision Engineering and Nanotechnology (ASPEN) (2007): 85‑90.  Afghanistan: 2nd International Conference of Asian Symposium for Precision Engineering and Nanotechnology (ASPEN).  ( 2nd International Conference of Asian Symposium for Precision Engineering and Nanotechnology (ASPEN),  6 ‑  9 Nov 2007, Gwangju, South Korea).
  25. Rahman, M, B M A A ABU, T Masaki, Y S Wong and H S Lim, “Development of integrated hybrid micro machining systems”. Proceedings of the International Conference on Advanced Manufacturing Technology (2007).  Kolkata: CMERI.  (Keynote paper)  (International Conference on Advanced Manufacturing Technology, 29 ‑ 30 Nov 2007, Central Mechanical Engineering Research Institute (CMERI), Kolkata, India).
  26. Rahman, M, “A Multi‑process Machine Tool for Hybrid Micro Machining”. Malayasia‑Japan Symposium, ed. Professor (2007).  Malyasia: Japan International Cooperation Agency.  (Malaysia‑Japan Symposium, 12 ‑ 14 Nov 2007, Hotel Seri Pacific, Kuala Lumpur, Malaysia).
  27. Rahman, M, B M A A ABU, T Masaki, Y S Wong and H S Lim, “Tool‑Based Integrated Hybrid Micro and Nano Machining”. Proceedings of the International Conference on Micro and Nano Fabrication, Team Tech 2007 (2007).  Bangalore: Team Tech.  (International Conference on Micro and Nano Fabrication, Team Tech 2007,  4 ‑  6 Oct 2007, J.N. Tata Auditorium, IISc, Bangalore, Bangalore, India).
  28. Rahman, M, B M A A ABU, H S Lim, T Masaki and Y S Wong, “Tool‑based Integrated Hybrid Micro Machining”. Proceedings of the Workshop on Futuristic Shaping Technology at MEso,Micro and Nano Scales (2007).  Kanpur: IIT Kanpur.  (Keynote paper)  (Workshop on Futuristic Shaping Technology at MEso,Micro and Nano Scales,  8 ‑ 12 Oct 2007, IIT Kanpur, Kanpur, India).
  29. Rahman, M, “Integrated Tool‑based Hybrid Micro Machining”.  Proceedings of the ASME International Manufacturing Science and Engineering Conference, Symposium on Hybrid Macro/Meso/Micro Manufacturing Processes, ed. Sheres Melkote and Steven Leong (2007).  Georgia: ASME.  ( ASME International Manufacturing Science and Engineering Conference, Symposium on Hybrid Macro/Meso/Micro Manufacturing Processes, 16 ‑ 20 Oct 2007, Georgia Tech, Georgia, Atlanta, United States).
  30. Rahman, M, B M A A ABU, T Masaki, Y S Wong and H S Lim, “Tool‑based Integrated Hybrid Micro/Nano Machining”. Proceedings of the International Conference on Advanced Design and Manufacturing (2007).  India: Sethu Institute of Technolog.  (Keynote paper)  (M. Rahman, A.B.M.A. Asad, Takeshi Masaki, , Y.S. Wong, H.S. Lim,  Tool‑based Integrated Hybrid Micro/Nano Machining, International Conference on Advanced Design and Manufacturing,  ICADM 2007, Sethu Institute of Technology, Kariapalli, Madurai, India, 9‑11 August, 2007,  9 ‑ 11 Aug 2007, Sethu Institute of Technology, Madurai, India).
  31. Rahman, M, “A comparative study on the performance of Transistor and RC type Pulse generator with focus in obtaining best quality micro‑hole during the micro‑EDM of Tungsten Carbide”. Proceeding of the CPIE‑2007 (2007).  Jalandhar: NIT Jalandhar.  (CPIE‑2007, 22 ‑ 24 Mar 2007, NIT Jalandhar, Jalandhara, India).
  32. Woon, K S, M Rahman and K Liu, “A study on the mechanism of tool‑based micromachining”. Proceedings of the 1st International & 22AIMTDR Conference, ed. P K Jain, (2006).  Roorki: IIT Roorki.  (1st International & 22AIMTDR Conference, 20 ‑ 22 Dec 2006, Indian Institute of Technology (IIT), Roorki, India).
  33. Rahman, M, “A Paper Review for an International Journal”. Proceedings of the Workshop on Scientific Writing for Int’l Journal, ed. Alva Edy Tontowi (2006).  Jogjakarta: Gajah Mada University.  (Workshop on Scientific Writing for Int’l Journal, 20 ‑ 21 Sep 2006, Gajah Mada University, Jogjakarta, Indonesia).
  34. Rahman, M, H S Lim, K S Neo, A Senthil kumar, Y S Wong and X P Li, “Tool‑based Nanometric Finishing and Micro Machining”. Proceedings of the International Conference on Micromanufacturing, ed. Shiv G Kapoor (2006).  Urbana Champain: University of Illinois, Urbana Champain.  (International Conference on Micromanufacturing, 13 ‑ 15 Sep 2006, University of Illinois, Urbana Champain, Urbana Champain, United States).
  35. Wang, Z G, M Rahman and Y S Wong, “High‑Speed Machining of Titanium Alloys”. ICOMAST 06, ed. V C Venkatesh, (2006).  Malacca: Multi‑Media University.  (International Conference on Manufacturing Science and Technology, 28 ‑ 30 Aug 2006, Multi‑Media University, Malacca, Malaysia).
  36. Rahman, M, H S Lim, K S Neo, A Senthil kumar, Y S Wong and X P Li, “Tool‑based micro and nano fabrication”. Proceedings of Conference on Micro and Nano Fabrication (2006).  Bangalore: The Aeronautical Society of India.  (Conference on Micro and nano Fabrication, 11 ‑ 12 Aug 2006, Bangalore, India).
  37. Cai, M B, X P Li and M Rahman, “Study of nanoscale cutting of monocrystalline silicon using molecular dynamics simulation”. Proceedings of the 7th ICFDM2006 (2006).  Riverwood: Frontiers of Design and Manufacturing.  (The 7th International Conference on Frontiers of Design and Manufacturing, 19 ‑ 22 Jun 2006, Songyuan Hotel, Guangzhou, China).
  38. Rahman, M, M. Sazedur Rahman, T. Saleh, H S Lim and S M SON, “Development of an On‑Machine Measurement System in Grinding Process for Machining compensation”. Proceedings of the CIRP 2nd international conference on High Performance Cutting (HPC) (2006).  Vancouver: University of British Columbia.  (CIRP 2nd international conference on High Performance Cutting (HPC), 12 ‑ 13 Jun 2006, University of British Columbia, Vancouver, Canada).
  39. Pervej Jahan, M, Y S Wong and M Rahman, “Identification of operating parameters for improved performance of micro‑EDM of Tungsten Carbide”. Proceedings of the 6th EUSPEN International Conference, ed. Professor Ekkard Brinksmeier, comp. Valerie Laird,Theresa Burke (2006).  Viena: EUSPEN.  (6th EUSPEN International Conference, 28 May ‑  1 Jun 2006, Baden Bei Wein, Congress Casino Baden, Viena, Austria).
  40. Pramanik, A, K S Neo, M Rahman, X P Li, Production Engineering Research Laboratory, Hitachi Ltd. and Production Engineering Research Laboratory, Hitachi Ltd., “Effects of workpiece composition and depth‑of‑cut during ultra‑precision machining of electroless‑nickel”. Proceedings of the International Conference on Micro and Nano Technologies, ICM/NFT’06 (2006).  Bangkok: Asian Institute of Technology.  (International Conference on Micro and Nano Technologies, ICM/NFT’06, 10 ‑ 12 May 2006, Novotel, Bangkok, Bangkok, Thailand).
  41. Lim, H S, M. M. Islam, M Rahman and A Senthil kumar, “Effective Dressing of ELID Grinding Wheels for Nano‑Finishing Silicon Wafers”. Proceedings of the International Conference on Manufacturing & Material Processing (ICMM) (2006).  Kuala Lumpur: Malay University.  (Keynote paper)  (International Conference on Manufacturing & Material Processing (ICMM), 14 ‑ 15 Mar 2006, Cititel Hotel, Kuala Lumpur, Malaysia).
  42. Rahman, M, H.S. Lim, K S Neo, A Senthil kumar, Y S Wong and X P Li, “Tool‑based nanometric finishing and micro‑machining”.  Proceedings of the International Conference on MEMS and Nano Technology (ICMN’06) (2006): 1‑8.  Kuala Lumpur: International Islamic University.  (International Conference on MEMS and Nano Technology (ICMN’06), 14 ‑ 15 Mar 2006, Pan Pacific Hotel, Kuala Lumpur, Malaysia)  (Keynote Paper).
  43. Lim, H S, S. W. Gan and M Rahman, “Development of fine tool servo for waviness errors compensation in ultra precision lathe”. Proceedings of The International Conference on MEMS and Nano Technology (IMCN’06) (2006): 205‑211.  Kuala Lumpur: Internnational Islamic University.  (The International Conference on MEMS and Nano Technology (IMCN’06), 14 ‑ 15 Mar 2006, Pan Pacific Hotel, Kuala Lumpur, Malaysia).
  44. Lim, H S, S. M. Alam and M Rahman, “Development and evaluation of a micro wire EDM device”. Proceedings of the International Conference on MEMS and Nano Technology (IMCN’06) (2006): 174‑0181.  Kuala Lumpur: International Islamic University.  (International Conference on MEMS and Nano Technology (IMCN’06), 14 Mar 2006, Pan Pacific Hotel, Kuala Lumpur, Malaysia).
  45. Rahman, M, H S Lim, K S Neo, A Senthil kumar, Y S Wong and X P Li, “Tool‑based micro‑machining and nano surface generation”. Proceedings of the 4th National Conference on Precision Engineering (2005).  Kolkata: Jadavpur University.  (The 4th National Conference on Precision Engineering, 16 ‑ 17 Dec 2005, Jadavpur University, Kolkata, India).
  46. Wong, Y S, J Sun, M Rahman and G S Hong, “Tool Condition Identification in Titanium Machining”. 2005 Proceedings International Symposium On Collaborative Research In Applied Science (2005).  Vancouver: University Of British Columbia Vancouver.  (Plenary paper)  (2005 Proceedings International Symposium On Collaborative Research In Applied Science, 19 ‑ 24 Oct 2005, University Of British Columbia, Vancouver, Canada).
  47. Sun, J, M Rahman, Y S Wong and G S Hong, “Effective Application of Neural Networks in Tool Condition Identification”. the 3rd International Conference on Leading Edge Manufacturing in 21st Century (2005).  Nagoya: the 3rd International Conference on Leading Edge Manufacturing in 21st Century.  (Plenary paper)  (the 3rd International Conference on Leading Edge Manufacturing in 21st Century,  5 ‑  8 Oct 2005, Nagoya, Japan).
  48. Sun, J, M Rahman, Y S Wong, Z.G. Wang, K S Neo and H Onozuka, “Modeling of Cutting Forces during Interrupted Machining of Titanium Alloys with Different Cooling Supply Strategies”. Proceedings International Symposium On Collaborative Research In Applied Science (2005).  Vancouver: University of British Columbia.  (International Symposium On Collaborative Research In Applied Science,  7 Oct 2005, University of British Columbia, Vancouver, Canada).
  49. Rahman, M, H S Lim, K S Neo, A Senthil kumar, Y S Wong and X P Li, “Applications and Challenges in Nano and Micro Fabrication”. Proceedings of NAME ’05, ed. Mohamed Dahalan Mohamed Ramli and Valliyappan Natarajan (2005): 343‑352.  Kuala Lumpur.  (National Conference on Advances in Mechanical Engineering, 18 ‑ 22 May 2005, Cititel Midvalley, Kuala Lumpur, Kuala Lumpur, Malaysia).
  50. Rahman, M, M.M. Islam, K Fathima, A Senthil kumar and H S Lim, “Electrolytic In‑process Dressing (ELID) Grinding for Nano‑surface Finish”.  Proceedings of the AUN/SEED‑Net 5th Field‑Wise Seminar on Manufacturing (2005).  Kuala Lumpur: University of Malay.  (AUN/SEED‑Net 5th Field‑Wise Seminar on Manufacturing, 28 Feb ‑  1 Mar 2005, University of Malay, Kuala Lumpur, Malaysia).
  51. Rahman, M, H S Lim, K S Neo, A Senthil kumar, Y S Wong and X P Li, “MICRO AND NANO FABRICATIONS ‑ CHALLANGES AND THEIR APPLICATIONS”. International Conference on Emerging Technologies in Intelligent System and Control, EISCO 2005 (2005).  Coimbatore, India.  (International Conference on Emerging Technologies in Intelligent System and Control, EISCO 2005,  5 ‑  7 Jan 2005, Kumaraguru College of Technology (KCT), Coimbatore, India)  (Keynote Paper).
  52. Rahman, M, A Senthil kumar, Y S Wong, H S Lim and K S Neo, “Tool‑based Micro/Nano Fabrication”. Proceedings of the All India Machine Tool and Desing Conference (2004).    (All India Machine Tool and Design Conference, 25 Aug 2004, Vellore Institute of Technology, Vellore, Chennai, India).
  53. Tauhiduzzaman, M, M Rahman, A Senthil kumar and W. C. Yau, “2nd International Conference on Structure, Processing and Processing of Materials, SPPM 2004”.  Proceedings of SPPM 2004 (2004).    (The 2nd International Conference on Structure, Properties and Processing of Materials, SPPM 2004, 25 ‑ 27 Feb 2004, Dhaka, Bangladesh).
  54. Rahman, M, H S Lim, K S Neo, A Senthil kumar, Y S Wong and X P Li, “Tool based Nano Finishing and Micro Machining”. Third International Conference on Advanced Manufacturing Technology, ICAMT 2004 (2004): K41‑K53.    (Third International Conference on Advanced Manufacturing Technology, ICAMT 2004, 11 ‑ 13 May 2004, Kuala Lumpur, Malaysia).
  55. Rahman, K.M. REZAUR, M Rahman, K S Neo, M Sawa and Y Maeda, “Wear Behaviour of Diamond Tools During Micro Grooving on Electroless Nickel‑Plated Material”. The 2nd International Conference on Structure, Processing and Properties of Materials, SPPM2004 (2004): 278‑286.  Dhaka, Bangladesh.  (The 2nd International Conference on Structure, Processing and Properties of Materials, SPPM2004, 25 ‑ 27 Feb 2004, Pan Pacific Sonargaon Hotel, Dhaka, Bangladesh).
  56. Pramanik, A, M Rahman, K S Neo, X P Li, M Sawa and Y Maeda, “Effect of machining conditions and phosphorous content in nano‑precision machining of electroless nickel”. Conference on Anmomaid, Nanotechnology, Information Technology, Communication and Control, Environment and Management, ed. Elmer Dadios, Marcelo Ang, Alvin Cubula and Jose Edgar Martin (2003)  (Int. Conference on Anmomaid, Nanotechnology, Information Technology, Communication and Control, Environment and Management, 27 ‑ 29 Mar 2003, Philippines).
  57. Fathima, K, M Rahman, A Senthil kumar and H S Lim, “A study on some factors affecting the mechanism of ELID grinding”. International Workshop on Extreme Optics and Sensors (2003)  (International Workshop on Extreme Optics and Sensors, 14 ‑ 17 Jan 2003, Tokyo, Japan).
  58. Zareena, A G R, M Rahman and Y S Wong, “Binderless CBN tools ‑ the perfect solution for machining titanium alloys”. Symposium on Manufacturing Excellence, ed. M S Shunmugam, O V K Chetty, N Ramesh Babu, R K Kumar (2002): 75‑76.  India: IIT Madras.  (Symposium on Manufacturing Excellence,  7 Jan 2002).
  59. Zareena, A R, M Rahman and Y S Wong, “Machining of titanium alloys”. 2nd International Conference on Manufacturing ICM‑2002, ed. A.F.M Anwarul Haques, Mahhiuddin Ahmed, A.N. Mustafizul Karim, N.R. Dhar, Selina Begum, comp. Department of Industrial & Production Engineering, Bangladesh University of Engineering & Technology (2002)  (2nd International Conference on Manufacturing ICM‑2002,  9 ‑ 11 Aug 2002, Dhaka, Bangladesh).
  60. Rahman, M and M S Chowdhury, “Influence of different tool materials on high speed machining of hardened tool steel”. Proceedings of the International Conference on Precision Engineering (ICOPE) 2000 (2000): 25‑30.    (Proceedings of the International Conference on Precision Engineering (ICOPE) 2000, 21 ‑ 23 Mar 2000).
  61. Salam, M, M Rahman and A S Kumar, “The effect of minimal quantities of lubricant in machining”. Proceedings of the International Conference on Manufacturing, ed. Mahiuddin Ahmed and M Golam Mohiuddin (2000): 266‑275.  Dhaka: Department of Industrial and Production Engineering, BUET.  (Proceedings of the International Conference on Manufacturing, 24 Feb 2000).
  62. Chowdhury, M S and M Rahman, “Performance evaluation of CBN in high speed milling”. Proceedings of the International Conference on Manufacturing, ed. Mahiuddin Ahmed and M Golam Mohiuddin (2000): 276‑284.  Dhaka: Department of Industrial & Production Engineering, BUET.  (Proceedings of the International Conference on Manufacturing, 24 Feb 2000).
  63. Baidya, K K, M Rahman and K H W Seah, “Effect of liquid nitrogen spray while machining Inconel 718 with CBN cutting tool”.  Proceedings of the International Conference on Manufacturing, ed. Mahiuddin Ahmed and M Golam Mohiuddin (2000): 349‑357.  Dhaka: Department of Industrial and Production Engineering, BUET.  (Proceedings of the International Conference on Manufacturing, 23 Feb 2000).
  64. Alam, M R, K S Lee, M Rahman and Y F Zhang, “Optimisation of machine tool and cutting tool selection for an automated process planning system”. Proceedings of the International Conference of Manufacturing, ICM 2000, ed. M Ahmed, M G Mohiuddin (2000): 665‑674.  Dhaka/Bangladesh: Department of Industrial & Production Engineering.  (Proceedings of the International Conference of Manufacturing, ICM 2000,  1 Feb 2000).
  65. Salam, M, M Rahman and A Senthil kumar, “Machining performance with minimal quantities of lubricant”. Proceedings of the IMCC 2000 International Manufacturing Conference in China (2000): 223‑224.  Hong Kong.  (Proceedings of the IMCC 2000 International Manufacturing Conference in China,  1 Jan 2000).
  66. Prakash, J R S, M Rahman and A Senthil kumar, “Effect of micro end milling on machining of copper”.  Proceedings of the IMCC 2000 International Manufacturing Conference in China (2000): 127‑128.  Hong Kong.  (Proceedings of the IMCC 2000 International Manufacturing Conference in China, 16 ‑ 17 Aug 2000).
  67. Chowdhury, M S and M Rahman, “High speed milling of hardened steel using CBN inserts”. Proceedings of the IMCC 2000 International Manufacturing Conference in China (2000): 193‑194.  Hong Kong.  (Proceedings of the IMCC 2000 International Manufacturing Conference in China, 16 ‑ 17 Aug 2000).
  68. Alam, M R, K S Lee, M Rahman, Y F Zhang and C Y Hung, “Optimization of process planning for the manufacture of injection mold components using Generic Algorithm”. IMTS‑2000 Manufacturing Conference (2000): (in CD format)  (IMTS‑2000 Manufacturing Conference,  6 ‑ 12 Sep 2000, Chicago, United States)  ((Invited paper)).
  69. Chowdhury, M S and M Rahman, “high speed machining of hardened die steel”. Proceedings of the 17th Conference on the ASEAN Federation of Engineering Organisation (1999): 216‑225.    (Proceedings of the 17th Conference on the ASEAN Federation of Engineering Organisation, 18 Nov 1999).
  70. Lee, L K, M Rahman, M A Mansur and J K Lum, “Design and development of a high performance linear guideway table system”. Proceedings of the 18th AIMTDR Conference, ed. S K R Chowdhury (1998): 38‑43.  Kharagpur/India.  (Proceedings of the 18th AIMTDR Conference, 10 Dec 1998).
  71. Rahman, M, K H W Seah and C H Hung, “A Novel Method to improve Tool Life during Machining of Inconel 718”.  Proceedings of the 4th Inter Conf on Advances in Materials & Processing Technologies (1998): 835‑842.    (4th International Conference on Advances in Materials and Processing Technologies, 24 ‑ 28 Aug 1998, Kuala Lumpur, Malaysia)
  72. Rahman, M, K H W Seah and H C Tan, “Evaluation of diamond tools on the machining of ceramics”.  Proceedings of International Conference on Structure, Processing and Properties of Materials,  SPPM ’97, ed. E Hague and ASMA Haseeb (1997): C41‑C49.  Bangladesh: Department of Materials and Metallurgical Engineering, BUET.  (Proceedings of International Conference on Structure, Processing and Properties of Materials,  SPPM ’97, 15 ‑ 17 Nov 1997, Department of Materials and Metallurgical Engineering, Dhaka, Bangladesh).
  73. Rahman, M, S Ramakrishna and H C Thoo, “The 4th International Conference on Die & Mould Technology:”. A Study on milling of Carbon/PEEK composites, Forging Innovative Die & Mould Technology (1997): 231‑240.  Malaysia: Federation of Asian Die & Mould Association.  (A Study on milling of Carbon/PEEK composites, Forging Innovative Die & Mould Technology,  1 Jun 1997, Kuala Lumpur, Malaysia).
  74. Rahman, M, “Machine tool industry of Singapore”. Proceedings of the Asian Machine Tool Engineering Forum ’95, ed. H Sato, comp. Japan Machine Tool Builders’ Association (1996): 95‑102.  Tokyo: Japan Machine Tool Builders’ Association.  (Asian Machine Tool Forum ’95,  8 ‑ 12 Sep 1995, Friendship Hotel, Beijing, China).
  75. Rahman, M and K H W Seah, “Machining of Chromia Ceramics using Diamond Tools”.  Progress of cutting and grinding, ed. N. Narutaki, Y. Yamane, D. Chen X. Wu and D. Zhang, comp. International Academic Publishers (1994): 127‑132  (International Conference on Progress of cutting and grinding, 26 ‑ 28 Sep 1994, Shanghai, China)  (Keynote).
  76. MUHAMMAD, P J, M Rahman and Y S Wong, “Fabrication of high‑aspect‑ratio EDM microelectrodes using on‑the‑machine tool fabrication techniques”. The 8th International Conference of Mechanical Engineering (ICME2009)  (, Bangladesh)
  77. Rahman, M, ABMA Asad, T Masaki, Y S Wong and HS Lim, “A tool‑based micro‑machining approach using micro‑EDM and micro‑turning”. Global Conference on Production and Industrial Engineering (22 ‑ 24 Mar 2007, National Institute of Technology, Jalandhar, Punjab, India)  (Keynote Paper).

 

 

 

International Oral Presentation

  1. Woon, K.S, A CHAUDHARI, A Senthil kumar* and M Rahman, “The Effects of Tool Degradation on Hole Straightness in Deep Hole Gundrilling of Inconel‑718”. 6th CIRP International Conference on High Performance Cutting, (2014).  San Franscisco: CIRP.  (6th CIRP International Conference on High Performance Cutting,, 23 ‑ 25 Jun 2015, Berkeley, San Francisco, United States).
  2. NEO, W K, A Senthil kumar* and M Rahman, “Novel micro‑grooving technique for machining of novel chevron sharkskin riblets on flat surface”. EUSPEN (2014).  Dubrovnik: EUSPEN.  (The 14th International Conference and Exhibition on European Society for Precision Engineering & Nanotechnology (EUSPEN 2014),  2 ‑  6 Jun 2014, Dubrovnik, Croatia).
  3. AHMED, A, M Rahman* and A Senthil kumar, “An experimental investigation of micro‑EDM drilling capability for Inconel 718 against SUS 304 stainless steel in deionized water”. ICOMM (2014).  Singapore: ICOMM.  (The 9th International Conference on Micro Manufacturing (ICOMM 2014), 25 Mar 2013 ‑ 28 Mar 2014, Nanyang Technological University, Singapore).
  4. NEO, W K, A Senthil kumar* and M Rahman, “Profile Accuracy Model for Hybrid Constant‑Arc and Constant‑Angle Method in the FTS/STS Diamond Turning”. ICOMM (2014).  Singapore: ICOMM.  (The 9th International Conference on Micro Manufacturing (ICOMM 2014), 25 ‑ 28 Mar 2014, Nanyang Technological University, Singapore).
  5. CHAUDHARI, A, K.S Woon, A Senthil kumar* and M Rahman, “Tool wear and Chip morphologies in Gundrilling of Inconel‑718”. XXIInd Conference on Processing and Fabrication of Advanced Materials (2013).  Singapore: IES.  (XXIInd Conference on Processing and Fabrication of Advanced Materials, 18 ‑ 20 Dec 2013, Singapore).
  6. NEO, W K, A Senthil kumar* and M Rahman, “A novel method for profile error analysis of freeform surfaces in FTS/STS diamond turning”. ASPEN 2013 (2013).  Taipei: ASPEN.  (The 5th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2013), 12 ‑ 15 Nov 2013, Taipei, Taiwan).
  7. AHMED, A, M Rahman* and A Senthil kumar, “Enhanced surface integrity and dimensional accuracy in micro‑EDM drilling using D shaped electrode”. 4M2013 (2013).  San Sebastian: 4M.  (The 10th International Conference on Multi‑Materials Micro Manufacture (4M2013),  8 ‑ 10 Oct 2013, San Sebastian, Spain).
  8. NEO, W K, A Senthil kumar* and M Rahman, “Offset diamond turning technique for machining of Fresnel lens arrays”. 4M2013 (2013).  San Sebastian: 4M.  (The 10th International Conference on Multi‑Materials Micro Manufacture (4M2013),  8 ‑ 10 Oct 2013, San Sebastian, Spain).
  9. NEO, W K, R HUANG, A Senthil kumar* and M Rahman, “Novel Machining Technique for Surface Patterning by Diamond Turning”. ICOMM (2013).  Victoria: ICOMM.  (The 8th International Conference on Micro Manufacturing (ICOMM 2013), 25 Mar ‑ 28 Dec 2013, Victoria, Victoria, BC, Canada).
  10. HUANG, R, W K NEO, A Senthil kumar*, K Liu and M Rahman, “An Innovative Method of Machining Freeform Feature Based on Digital Image by Fast Tool Servo Diamond Turning”. 4th International 25th All India Manufacturing Technology Design and Research Conference (AIMTDR 2012) (2012). India: AIMTDR.  (4th International 25th All India Manufacturing Technology Design and Research Conference (AIMTDR 2012), 14 ‑ 16 Dec 2012, Kolkata, India).
  11. MUHAMMAD, P J, M Rahman* and Y S Wong, “Migration of Materials during Finishing Micro‑EDM of Tungsten Carbide;”. Proceedings of the 9th Asia‑Pacific Conference on Materials Processing (2010). Sydney, Australia: APCMP.  ( The 9th Asia‑Pacific Conference on Materials Processing, APCMP2010,  7 ‑ 10 Jun 2010, Sydney, Australia, Sydney, Australia).
  12. MUHAMMAD, P J, M Rahman* and Y S Wong, “Modeling and experimental study of vibration‑assisted micro‑EDM of cemented carbide”. euspen 10th International Conference (31 May ‑  4 Jun 2010, Netherlands).
  13. MUHAMMAD, P J, M Rahman* and Y S Wong, “Migration of Materials during Finishing Micro‑EDM of Tungsten Carbide”. APCMP2010 ‑ The 9th Asia‑Pacific Conference on Materials Processing (2010). Sydney: Trans Tech Publications.  (The 9th Asia‑Pacific Conference on Materials Processing,  7 ‑  9 Jun 2010, Sydney, Australia).
  14. Rahman, M, “Modeling and experimental study of vibration‑assisted micro‑EDM of cemented carbide”. Proceedings of the euspen 10th International Conference (2010). Delft: EUSPEN.  (euspen 10th International Conference, 31 May ‑  4 Jun 2010, Delft, Netherlands).
  15. Wong, Y S, D YU, S.W. Gan, G S Hong and M Rahman, “Design of a Fast tool servo based Diamond Turning Machine for Fabricating Micro‑structured Surfaces”. Key Engineering Materials, 443 (2010).  Zurich: Trans Tech Publications.  (9th Asia Pacific Conference on Materials Processing,  7 ‑ 10 Jun 2010, University of New South Wales, Sydney, Australia).
  16. MOHAMMAD, A H and M Rahman*, “An evaluation of EDM electrodes by localized electrochemical deposition”. 7th International Conference on Manufacturing Research (ICMR 09) (2009). Coventry: 7th International Conference on Manufacturing Research (ICMR 09).  (7th International Conference on Manufacturing Research (ICMR 09),  8 ‑ 10 Sep 2009, University of Warwick, Coventry, United Kingdom).
  17. MUHAMMAD, P J, Y S Wong and M Rahman, “A study on fine‑finish micro‑EDM of tungsten carbide in nanopowder‑mixed dielectric”. 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN) 2009 (, Afghanistan).
  18. MUHAMMAD, P J, S TANVEER, Y S Wong and M Rahman, “Study of micro‑EDM of tungsten carbide with workpiece vibration”. Advances in Materials and Processing Technologies conference (AMPT 2009) (, Afghanistan).
  19. MUHAMMAD, P J, Y S Wong and M Rahman, “A comparative study on the performance of sinking and milling micro‑EDM for nanofinishing of tungsten carbide”. Proceedings of the 6th International Symposium on Nano Manufacturing (ISNM‑6) (2008). Athens: (ISNM‑6).  (6th International Symposium on Nano Manufacturing (ISNM‑6), 12 Nov 2008, Athens, Greece).
  20. CHANDRA, N, M Rahman* and K S Neo, “Enhancing the performance of PCD tools for machining WC by ultrasonic elliptical vibration cutting method”. 1st International Conference on Nanomanufacturing (nanoMan2008) (2008). Singapore: 1st International Conference on Nanomanufacturing (nanoMan2008).  (The 1st International Conference on Nanomanufacturing (nanoMan2008), 14 ‑ 16 Jul 2008, Singapore).
  21. Rahman, M, “A high precision piezoelectric based fine tool servo system for diamond turning”. The First International Conference on Manufacturing (2008). Singapore:  The First International Conference on Manufacturing.  ( The First International Conference on Manufacturing, 13 ‑ 16 Jul 2008, Singapore).
  22. MUHAMMAD, P J, M M ANWAR, Y S Wong and M Rahman, “Generation of nano‑level surface finish in the micro‑EDM of hard tool/die materials using RC‑generator”. Proceedings of the 1st International Conference on Nanomanufacturing (nanoMan 2008) (2008). Singapore: Nanomanufacturing Society.  (The 1st International Conference on Nanomanufacturing (nanoMan 2008), 14 ‑ 16 Jul 2008, SMU, Singapore).
  23. MOHAMMAD, A H, S W GAN and M Rahman*, “Fabrication of Complex Shape Electrodes by Localized Electrochemical Deposition”. 8th Asia‑Pacific Conference on Materials Processing (APCMP) (2008). Guangzhou: 8th Asia‑Pacific Conference on Materials Processing (APCMP).  (8th Asia‑Pacific Conference on Materials Processing (APCMP), 15 ‑ 20 Jun 2008, Guilin, Guangzhou, China).
  24. CHANDRA, N, M Rahman* and K S Neo, “A STUDY ON ULTRASONIC ELLIPTICAL VIBRATION CUTTING OF TUNGSTEN CARBIDE”. Proceedings of the 8th Asia‑Pacific Conference on Materials Processing, ed. C.Y. Wang, X.P. Li, J. Wang (2008): 618‑623. Sydney: Riverwood, N.S.W : Frontiers of Design and Manufacturing, 2008.  (8th Asia‑Pacific Conference on Materials Processing, 15 ‑ 20 Jun 2008, Guilin, Guangzhou, China).
  25. GAN, S W, M Rahman* and H S Lim, “Development of a fine tool servo system with force measurement for ultra‑precision turning”. International Symposium on Nanomanufacturing ISNM2008 (2008). Singapore: International Symposium on Nanomanufacturing ISNM2008. (International Symposium on Nanomanufacturing ISNM2008, 25 ‑ 27 Jan 2008, Singapore).
  26. MUHAMMAD, P J, Y S Wong, M Rahman and BMAA ABU, “An Experimental Investigation on the Surface Characteristics of Tungsten Carbide for the Fine‑finish Die‑sinking and Scanning Micro‑EDM”. Proceedings of the 8th Asia‑Pacific Conference on Materials Processing, ed. CY Wang, XP Li and J Wang (2008): 612‑617. Sydney: Riverwood, N.S.W..  (8th Asia Pacific Conference on Materials Processing, 15 ‑ 20 Jun 2008, Guilin Royal Garden Hotel‑Baiyun Hotel, Guilin‑Guangzhou, China).
  27. MOHAMMAD, A H, S W GAN, H S Lim and M Rahman*, “Fabrication of EDM Electrode by Localized Electrochemical Deposition”. 2nd International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN) (2007). Gwangju: 2nd International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN).  (2nd International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN),  6 Nov 2007, Gwangju, South Korea).
  28. WOON, K S, M Rahman* and K Liu, “Numerical and experimental study of contact behaviour in tool‑based micromachining of steel”. Asian Symposium for Precision Engineering and Nanotechnology (2007). South Korea: Asian Symposium for Precision Engineering and Nanotechnology.  (Asian Symposium for Precision Engineering and Nanotechnology 2007,  6 Nov 2007, Gwangju, South KOrea).
  29. Rahman, M, “Towards Fine‑finish micro‑EDM of Tungsten Carbide using RC‑Generator”. Asian Electrical Machining Symposium (2007): 252‑257. Tokyo: Asian Electrical Machining Association.  (Asian Electrical Machining Symposium, 28 ‑ 30 Nov 2007, Nagoya, Japan).
  30. Li*, X P, M B Cai and M Rahman, “Study of the upper bound of tool edge radius in nanoscale ductile mode cutting of silicon wafer”. Proceedings of Study of the upper bound of tool edge radius in nanoscale ductile mode cutting of silicon wafer (2007): 151. Chongqing: Chongqing University.  (International Conference on Product Design and Manufacturing Systems (PDMS 2007), 12 ‑ 15 Oct 2007, Chongqing University, Chongqing, Singapore).
  31. WOON, K S, M Rahman* and K Liu, “A fundamental study of tool‑based micromachining using finite element analysis with arbitrary Lagrangian‑Eulerian method”. CIRP International Workshop on Modelling of Machining Operations (2007). Reggio Calabria: CIRP International Workshop on Modelling of Machining Operations.  (10th CIRP International Workshop on Modelling of Machining Operations, 27 Aug 2007, Reggio Calabria, Italy).
  32. Cai, M B, X P Li* and M Rahman, “Characteristics of “dynamic hard particles” in nanoscale ductile mode cutting of monocrystalline silicon with diamond tools in relation to tool groove wear”. Delegate Manual of the 16th International Conference on Wear of Materials, ed. Gill Heaton (2007): 10A.4. Montreal: Elsevier.  (The 16th International Conference on Wear of Materials, 15 ‑ 19 Apr 2007, Hilton Montreal, Montreal, Canada).
  33. CHANDRA, N and M Rahman*, “A study on ultrasonic vibration cutting of low alloy steel”. 7th Asia‑Pacific Conference on Materials Processing (APCMP) (2006). Singapore:  7th Asia‑Pacific Conference on Materials Processing (APCMP).  ( 7th Asia‑Pacific Conference on Materials Processing (APCMP),  4 Dec 2006, Singapore).
  34. Cai, M B, X P Li* and M Rahman, “Study of the temperature and stress in nanoscale ductile mode cutting of silicon using molecular dynamics simulation”. Proceedings of 7th Asia Pacific Conference on Materials Processing (2006): 106. Singapore: PAC.  (The 7th Asia Pacific Conference on Materials Processing,  4 ‑  6 Dec 2006, National University of Singapore, Singapore).
  35. Cai, M B, X P Li* and M Rahman, “STUDY OF THE CRACK INITIATION IN NANOSCALE DUCTILE MODE CUTTING OF SILICON BY MOLECULAR DYNAMICS SIMULATION”. Proceedings of 2006 ISFA (2006): 85‑91. Kyoto: Institution of System, control and Information Engineers.  (2006 International Symposium on Flexible Automation, 10 ‑ 12 Jul 2006, Senri Hankyu Hotel, Osaka, Japan).
  36. Rahman, M, “Performance Evaluation of Diamond Tools for Micro Cutting of V‑Grooves on Electroless Nickel Plated Die Materials”. Proceedings of the 6th EUSPEN International Conference, ed. Professor Ekkard Brinksmeier, comp. Valerie Laird, Theresa Burke (2006): 264 ‑ 267. Viena,: EUSPEN.  (6th EUSPEN (European Society for Precision Engineeringand Nano Technology) International Conference, 28 May ‑  1 Jun 2006, Baden Bei Wein, Congress Casino Baden, Viena, Austria).
  37. Rahman*, M and Sadiq M Alam, “Wire EDM technology with a focus on enhanced micro precision fabrication”. Proceedings of the 6th International conference and 8th annual general meeting of the Euspen society for precision engineering and nanotechnology (2006). Germany: EUSPEN.  (6th International conference and 8th annual general meeting of the Euspen society for precision engineering and nanotechnology, 28 May ‑  1 Jun 2006, Baden Bei Wien, Austria).
  38. Sun*, J, G S Hong*, Y S Wong, M Rahman, Y Sun and ZG Wang, “Decision Making Methods in Tool Condition Monitoring”. Proceeding on Third International Conference on Computational Intelligence, Robotics and Autonomous Systems (2005). London: Elsevier.  (The Third International Conference on Computational Intelligence, Robotics and Autonomous Systems, 13 ‑ 16 Dec 2005, Orchard Hotel, Singapore).
  39. Wang, Z G, M Rahman*, G S Hong, J Sun and Y S Wong, “Optimization of Multi‑Pass Milling Using Parallel Genetic Algorithm”. Proceedings of the 3rd International Conference on Computational Intelligence, Robotics and Autonomous Systems (2005). Singapore: Robotics Association of Singapore.  (3rd International Conference on Computational Intelligence, Robotics and Autonomous Systems, 14 Dec 2005, Singapore).
  40. Wang, Z. G., J Sun, M Rahman*, Y S Wong and K S Neo, “Geometrical Modeling for Micro End Milling Process”. Proceedings of the 1st International Conference on Precision Engineering and Micro/Nano Technology in Asia (2005). Shenzhen: University.  (1st International Conference on Precision Engineering and Micro/Nano Technology in Asia, 15 ‑ 17 Nov 2005, Shenzhen, China).
  41. Sun, J, M Rahman*, Y S Wong and Z. G. Wang, “Performance of Minimum Quantity Lubrication on Tool Life in End Milling Titanium Alloy”. Prfoceedings of International Conference on Precision Engineering and Micro/Nano Technology in Asia (2005). Shenzhen: University.  (International Conference on Precision Engineering and Micro/Nano Technology in Asia, 15 ‑ 17 Nov 2005, Shenzhen, Shenzen, China).
  42. Rahman, M, J Sun* and Y S Wong, “Effects of Cooling Supply Strategies and Cutting Conditions on Tool Life in End Milling Titanium Alloy”. the 3rd International Conference on Leading Edge Manufacturing in 21st Century (2005). Nagoya: the 3rd International Conference on Leading Edge Manufacturing in 21st Century.  (the 3rd International Conference on Leading Edge Manufacturing in 21st Century,  5 ‑  8 Oct 2005, Nagoya, Japan).
  43. Sun*, J, M Rahman*, Y S Wong, G S Hong and Y Sun, “Effective Application of Neural Networks in Tool Condition Identification”. 3rd International Conference on Leading Edge Manufacturing in 21st Century (2005). Nagoya: Chubu University.  (3rd International Conference on Leading Edge Manufacturing in 21st Century, 19 ‑ 22 Oct 2005, Port Messe Nagoya, Nagoya, Japan).
  44. Wong*, Y S, J Sun*, M Rahman and G S Hong, “Tool Condition Identification in Titanium Machining”. In International Symposium on Collaborative Research in Applied Science (2005). Vencouver: UBC.  (In International Symposium on Collaborative Research in Applied Science (ISOCRIAS),  7 ‑  9 Oct 2005, UBC, Vencouver, Canada).
  45. Rahman*, M, J Sun, Y S Wong, Z. G. Wang, K S Neo and C H Tan, “Effects of Cooling Supply Strategies and Cutting Conditions on Tool Life in End Milling Titanium Alloy”. 3rd International Conference on Leading Edge Manufacturing in 21st Century (2005). Tokyo: JSME.  (3rd International Conference on Leading Edge Manufacturing in 21st Century, 20 Jul 2006, Nagoya, Japan).
  46. Rahman*, M, Y S Wong, Z. G. Wang, K S Neo, J Sun and H Onozuka, “Modeling of Cutting Forces during Interrupted Machining of Titanium Alloys with Different Coolant Supply Strategies”. International Symposium on Collaborative Research in Applied Science (ISOCRIAS) (2005). Vancouver: University of British Columbia.  (International Symposium on Collaborative Research in Applied Science (ISOCRIAS),  7 ‑  9 Oct 2005, University of British Columbia, Vancouver, Canada).
  47. Wang*, Z G, M Rahman, Y S Wong, J Sun, K S Neo, C H Tan and H Onozuka, “Modeling of cutting forces during machining of titanium alloys with different coolant strategies”. 8th CIRP International Workshopon Modeling in Machining Operations (2005): 275‑282 (8th CIRP International Workshop on Modeling in Machining Operations,  1 May 2005, Chemnitz, Germany).
  48. Biddut*, A Q, M Rahman and K S Neo, “Effect of Rake Angle of Diamond Tools on Micro Grooving”. Of 5th euspen International Conference (2005): 631‑634. Montpellier‑France.  (Proc. Of 5th euspen International Conference,  8 ‑ 11 May 2005).
  49. Arefin, S, X P Li*, M Rahman and T He, “MACHINED SURFACE AND SUBSURFACE IN RELATION TO CUTTING EDGE RADIUS IN NANOSCALE DUCTILE CUTTING OF SILICON”. Proceedings of The 33th North American Manufacturing Research Conference (NAMRC 33) (2005). United States: SME.  (The 33th North American Manufacturing Research Conference (NAMRC 33), 24 ‑ 28 May 2005, New York, United States).
  50. Li*, X P, T He and M Rahman, “Tool wear characteristics and influence in ductile cutting of silicon”.
  51. Proceedings of the 15th international conference on wear of materials (2005). United States. (The 15th International Conference on Wear of Materials, 24 ‑ 28 Apr 2005, Sharenton Hotel, San Diego, United States).
  52. Biddut*, A Q, K S Neo and M Rahman, “Cutting Performance of Single Crystal Diamond Tools during Micro Grooving on Electroless Nickel Plated Die Materials”. Proceeding Of 4th International Mechanical Engineering Conference (2004). Dhaka, Bangladesh.  (Proceeding Of 4th International Mechanical Engineering Conference, 29 ‑ 31 Dec 2004, Dhaka, Bangladesh).
  53. Lim*, H S, Y S Wong and M Rahman, “On‑machine optical measurement of micro‑EDM tool wear”. 3rd internation symposium on instrumentation science and technology, ed. TAN Jiu‑bin and WEN Xian‑fang, comp. Harbin Institute of Technology Press (2004): 2‑1027‑2‑1033. Xian Chian: Harbin Institute of Technology Press.  (ISIST2004, 18 ‑ 22 Aug 2004, Gloria Plaza Hotel, Xian, China).
  54. Arefin, S, K Liu, X P Li* and M Rahman, “Cutting Conditions and Tool Edge Radius for Nanoscale Ductile Cutting of Silicon Wafer”. Proceedings of 2004 Japan‑USA Symposium on Flexible Automation (2004).   (2004 Japan‑USA Symposium on Flexible Automation, 19 ‑ 21 Jul 2004, Denver, United States).
  55. Arefin, S, K Liu, X P Li* and M Rahman, “Cutting conditions and tool edge radius for nanoscale ductile cutting of silicon wafer”. Proceedings of 2004 Japan‑USA Symposium on Flexible Automation (2004).   (2004 Japan‑USA Symposium on Flexible Automation, 19 ‑ 23 Jul 2004, Denver, Colorado, United States).
  56. Wang, Z G, Y S Wong* and M Rahman, “Development of the parallel optimization method based on genetic simulated annealing”. 2004 Genetic and Evolutionary Computation Conference (2004). United States.  (2004 Genetic and Evolutionary Computation Conference, 26 ‑ 30 Jun 2004, Seattle, Washington, United States).
  57. He, T, X P Li*, M Rahman and K Liu, “An Atomic Dynamics Model for Nanoscale Ductile Cutting of Silicon Wafer”. Proceeedings of the 6th International Conference on Frontiers of Design and Manufacturing (2004): 319‑326. Xi’an, China.  (The 6th International Conference on Frontiers of Design and Manufacturing, 21 ‑ 23 Jun 2004, Xi’an, China).
  58. Tauhiduzzaman, M, M Rahman* and A Senthil kumar, “Influence of engagement arc on tool life in micro end milling operatioin”. Proceedings of the 3rd International Conference on Advanced Manufacturing Technology, comp. Dept. of Mech. Engineering, Malaya University (2004). Kuala Lumpur.  (The 3rd International Conference on Advanced in Manufacturing Technology, 11 ‑ 13 May 2004, Pan Pacific Hotel, Kuala Lumpur, Malaysia).
  59. Uddin, SHARIF, K H W Seah*, M Rahman, X P Li and K Liu, “Wear behavior of single crystal diamond tools in ductile cutting of silicon wafer materials”. 3rd International Conference on Advanced Manufacturing Technolgy (2004): 209‑215.    (3rd International Conference on Advanced Manufacturing Technolgy, 11 ‑ 13 May 2004, Sheraton Hotel, Kuala Lumpur, Malaysia).
  60. Liu, K, X P Li, M Rahman, C C Chan and X D Liu, “Nanomachining technology for wafer fabrication”. Workshop on NanoScience and Engineering, IMRE, NUS (2002) (Workshop on NanoScience and Engineering, IMRE, NUS, 23 ‑ 24 Jan 2002, Singapore).
  61. Uddin, SHARIF, K H W Seah*, M Rahman and X P Li, “Effects of crystal orientation on wear characteristics of single crystal diamond tools during ductile cutting of silicon wafer,”. 2nd International Conference on Structure, Processing and Properties of Materials (2004): 304‑312.    (2nd International Conference on Structure, Processing and Properties of Materials, 25 ‑ 27 Feb 2004, Sheraton Hotel, Dhaka, Bangladesh).
  62. Sun*, J, G S Hong*, M Rahman and Y S Wong, “The Application of Nonstandard Support Vector Machine in Tool Condition Monitoring System”. Proceedings of the Second IEEE International Workshop on Electronic Design, Test and Applications (DELTA’04) (2004): 295‑300. Perth: IEEE.  (Second IEEE International Workshop on Electronic Design, Test and Applications (DELTA 04), 28 ‑ 30 Jan 2004, Burswood International Resort and Convention Centre, Perth, Australia).
  63. Sharif uddin, M, K H W Seah*, M Rahman, X P Li and K Liu, “Wear behavior of single cystral diamond tools in ductile mode cutting of silicon wafer materials”. Proceedings of the third international conference on advanced manufacturing technology (2004): 209‑215.    (Third international conference on advanced manufacturing technology, 11 ‑ 13 May 2004, Kuala Lumpur, Malaysia).
  64. Wong*, Y S, G S Hong and M Rahman, “Intelligent Sensor‑based Information Utilization: Key to Effective and Reliable Tool Condition Monitoring for Automated Machining System”. 3rd International Symposium on Instrumentation Science and Technology, ed. Tan Jiubin and Wen Xianfang (2004): 577‑580. Harbin: Harbin Institute of Technology Press.  (3rd International Symposium on Instrumentation Science and Technology, 18 ‑ 22 Aug 2004, Gloria Plaza Hotel, Xian, China)  (Invited Paper).
  65. Haque, T, S Balakumar, A Senthil kumar* and M Rahman, “A kinematic study of novel split pad CMP technique”. Ninth International Chemical Mechancial Planarization for ULSI multilevel Interconnects (2004). Los Angeles.  (Ninth International Chemical Mechanical Planarization for ULSI multilevel Interconnects Conference,  1 Jan 2004, Los Angeles, United States).
  66. Pramanik, A, K S Neo, M Rahman, X P Li, M Sawa and Y Maeda, “Comparison of Cutting Performance of Artificial and Natural Diamond Tools During Ultra‑precision Machining of Electroless Nickel Plated Die Materials”. International Conference on Precision Engineering (ICoPE2003/04) (2004): 286‑291.   (International Conference on Precision Engineering (ICoPE2003/04),  2 ‑  5 Mar 2004, Grand Hyatt Singapore, Singapore).
  67. He, T, K Liu, X P Li and M Rahman, “A Method of Atomic Dynamic Modeling for Nanometric ductile cutting of Silicon Wafer Material”. Proceedings of International Conference on Precision Engineering 2003/2004 (2004): 409‑417.   (International Conference on Precision Engineering 2003/2004,  2 ‑  5 Mar 2004, Singapore).
  68. Li*, X P, C C Chan, K Liu, M Rahman and X D Liu, “Effect of cutting edge radius on ductile‑brittle transition in cutting of silicon‑wafers”. The 5th International Conference on Frontiers of Design and Manufacturing (2002): 113‑118 (The 5th International Conference on Frontiers of Design and Manufacturing,  9 ‑ 13 Jul 2002, Dalian, China).
  69. Liu, K, X P Li, M Rahman, C C Chan and X D Liu, “Nanomachining technology for wafer fabrication”. Workshop on NanoScience and Engineering, IMRE, NUS (2002) (Workshop on NanoScience and Engineering, IMRE, NUS, 23 – 24 Jan 2002, Singapore).
  70. Liu, K, X P Li, M Rahman and XIAO DONG Liu, “Study on surface topography in nanometric ductile cutting of silicon wafers”. 4th Electronics Packaging Technology Conference (2002): 200‑205. Singapore: IEEE.  (4th Electronics Packaging Technology Conference, 10 ‑ 12 Dec 2002, Singapore).
  71. Liu, K, X P Li*, M Rahman and X D Liu, “Imoroving ductile mode cutting of tungsten carbide by ultrasonic vibration”. Proceedings of 2002 Japan‑USA Symposium on Flexible Automation (2002): 151‑156 (Proceedings of 2002 Japan‑USA Symposium on Flexible Automation, 14 ‑ 19 Jul 2002, Hiroshima, Japan).
  72. Liu, K, X P Li*, M Rahman and X D Liu, “The critical conditions for ductile chip formation in grooving of tungsten carbide”. Proceedings of 2002 Japan‑USA Symposium on Flexible Automation (2002): 157‑161 (Proceedings of 2002 Japan‑USA Symposium on Flexible Automation, 14 ‑ 19 Jul 2002, Hiroshima, Japan).72
  73. Liu, K, X P Li* and M Rahman, “Ultrasonic vibration assisted cutting of tungsten carbide”. The 10th international Manufacturing Conference in China (2002): 1‑202 (The 10th international Manufacturing Conference in China, 11 ‑ 13 Oct 2002, Xiamen, China).
  74. Liu, K, X P Li*, M Rahman and X D Liu, “Study on surface topography in nanometric ductile cutting of silicon wafers”. Proceedings of 4th Electronics Packaging Technology Conference 2002 (2002): 200‑205 (Proceedings of 4th Electronics Packaging Technology Conference 2002, 10 ‑ 12 Dec 2002).
  75. Sun, J, M Rahman*, Y S Wong and G S Hong, “Feature selection in tool condition monitoring system”. ICMT 2002, 6th International Conference on Mechatronics Technology (2002): 230‑235 (ICMT 2002, 6th International Conference on Mechatronics Technology,  1 Sep 2002, Kyushu Institute of Technology, Kita Kiyushu, Japan).
  76. Sun, J, G S Hong*, M Rahman and Y S Wong, “Feature extraction and selection in tool condition monitoring system”. A1 2002: Advances in Artificial Intelligence, 15th Australian Joint Confeence on Artificial Intelligence (2002): 487‑497.   (A1 2002: Advances in Artificial Intelligence, 15th Australian Joint Confeence on Artificial Intelligence,  1 Jan 2002, Australia)
  77. Rahman*, M, A Senthil kumar, H S Lim and K Fathima, “Nano‑surface finish using electrolytic in‑process dressing (ELID) grinding”. 2nd International Conference on Precision Engineering and Nano Technology (ICPN 2002) (2002): 29‑43 (2nd International Conference on Precision Engineering and Nano Technology (ICPN 2002), 28 ‑ 30 Oct 2002, Changsha, Hunan, China).
  78. Liu, K, X P Li*, M Rahman and XIAO DONG Liu, “Improving ductile mode cutting of tungsten carbide by ultrasonic vibration”. 2002 Japan‑USA Symposium on Flexible Automation (2002): 151‑156. Japan: University of Tokyo.  (2002 Japan‑USA Symposium on Flexible Automation, 14 ‑ 19 Jul 2002, International Convention Centre, Hiroshima, Japan).
  79. Pramanik*, A, K S Neo, M Rahman, M. Sawa and Y. Maeda, “Ultra‑precision machining of electroless nickel plated die materials”. International Conference on Manufacturing (ICM‑2002) (2002) (International Conference on Manufacturing (ICM‑2002),  9 ‑ 11 Aug 2002, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh).
  80. Prakash*, J R S, M Rahman, A Senthil kumar and S C Lim, “A model for predicting tool life for coated micro end mill”. 4th International machining and grinding conference (2001). Troy, USA.  (4th International machining and grinding conference,  7 ‑ 10 May 2001, Troy, Detroit, M1, United States).
  81. Prakash*, J R S, M Rahman, A Senthil kumar and S C Lim, “A model for predicting tool life in micro milling of copper”. International symposium of advanced manufacturing technology ‘ISAMT 2001’ (2001) (International symposium of advanced manufacturing technology ‘ISAMT 2001’, 27 ‑ 29 Oct 2001, Nanjing, China).
  82. Lee*, K S, M Rahman, Y F Zhang, Y D Li and K S Sankaran, “Comparative study of HSM and EDM in Injection Mould Manufacturing”. Proceedings of 10th International Conference of Precision Engineering, ed. I Inasaki (2001): 324‑328. Japan: Kluwer Academic Publishers.  (Proceedings of 10th International Conference of Precision Engineering, 18 ‑ 20 Jul 2001, Yokohama, Japan).
  83. Zareena, A R, M Rahman* and Y S Wong, “High speed machining of aerospace alloy (Ti‑6Al‑4V).”. Proceedings of the 33rd International SAMPE Technical Conference. (2001): 731‑750 (33rd International SAMPE Technical Conference,  5 ‑  8 Nov 2001, Seettle, United States).
  84. Zareena*, A R, M Rahman and Y S Wong, “Evaluation of CBN tools for high speed machining of Ti‑6Al‑4V alloys.”. Proceedings of the 17th Annual Conference of International Titanium Association (2001).  United States.  (17th Annual Conference  of International Titanium Association, 30 Sep ‑  2 Oct 2001, Las Vegas, United States).85
  85. Liu*, W, M Rahman and Y S Wong, “Micro machining of silicon by Electrical Discharge Machining”. Proceedings of the 4th International Machining & Grinding Conference, comp. Society of Manufacturing Engineers (2001): 1‑8. Detroit/USA: SME.  (4th International Machining & Grinding Conference,  7 May 2001, Somerset Inn, Inn, Michigan, United States).
  1. Prakash, J R S, M Rahman*, A Senthil kumar and S C Lim, “Effect of minimal quantities of lubricant in micro milling”. Proceedings of the 10th ICPE (2001) (10th International Conference on Precision Engineering (ICPE), 18 ‑ 20 Jul 2001).
  2. Yuan, N, M Rahman* and Y S Wong, “Monitoring of chatter in high speed endmilling using audio‑signals method”. Proceedings of the 33rd International MATADOR Conference (2000): 421‑426. Manchester/UK.  (Proceedings of the 33rd International MATADOR Conference, 13 Jul 2000).
  3. Karim, M B, M Rahman* and M A Mansur, “Design and evaluation of machine tool components using cementitions composites”. Proceedings of the 33rd International MATADOR Conference (2000): 495‑500. Manchester/UK.  (Proceedings of the 33rd International MATADOR Conference, 13 Jul 2000).
  4. Rahman*, M, M A Mansur and M B Karim, “Manufacture of machine tools using non‑conventional materials”. Proceedings of the International Conference on Manufacturing, ed. Mahiuddin Ahmed and M Golam Mohiuddin (2000): 780‑796. Dhaka: Department of Industrial and Production Engineering, BUET.  (Proceedings of the International Conference on Manufacturing, 24 Feb 2000).
  5. Lee*, K S, M R Alam, Y F Zhang and M Rahman, “An automated process planning for the manufacture of injection mould components”. Proceedings of the International Conference on Die & Mould Technology (2000): 190‑199.   (Proceedings of the International Conference on Die & Mould Technology, 26 ‑ 28 Jul 2000, Beijing Xin Da Du Hotel, Beijing, China).
  1. Baidya, K P, S Ramakrishna*, A Campbell and M Rahman, “Design and evaluation of composite external fracture fixation device”. Proceedings of teh 12th International Conference on Composite Materials, ed. T Massard and A Vautrin (1999): 496.   (12th International Conference on Composite Materials,  1 Jul 1999, Paris, France)  (Composites).Tay*, E H, E A Haider and M Rahman, “The potential of plating techniques in the development of rapid tools”. Proceedings of the International Conference of Precision Engineering (ICOPE) 2000 (2000): 37‑42 (21 ‑ 23 Mar 2000, Singapore).
  2. Haider, E A, E H Tay* and M Rahman, “Integration of powder metal based rapid prototyping and plating techniques for EDM tooling”. Proceedings of the International Conference on Manufacturing, ICM 2000, ed. M Ahmed and M G Mohiuddin (2000): 161‑168 (24 ‑ 26 Feb 2000, Dhaka, Bangladesh).
  3. Tay*, E H, M Rahman, C A Haider, J Y Lee and T E H Ong, “Rapid tools with high quality surface finish & strength using high‑temperature epoxy resin & electroless nickel plating”. Proceedings of the XIII Surface Modification Technologies International Conference, ed. T S Sudarshan, K.A. Khor and M. Jeandin (1999): 151‑156. ASM International.  ( 8 ‑ 10 Sep 1999, Mandarin Singapore, Singapore).
  4. Haider, E A, E H Tay* and M Rahman, “Integration of powder metal based rapid prototyping and plating techniques for EDM tooling”. Proceedings of the International Conference on Manufacturing, ICM 2000, ed. M Ahmed and M G Mohiuddin (2000): 161-168 (24 – 26 Feb 2000, Dhaka, Bangladesh).
  5. Tay*, E H, M Rahman, C A Haider, J Y Lee and T E H Ong, “Rapid tools with high quality surface finish & strength using high-temperature epoxy resin & electroless nickel plating”. Proceedings of the XIII Surface Modification Technologies International Conference, ed. T S Sudarshan, K.A. Khor and M. Jeandin (1999): 151-156. ASM International. ( 8 – 10 Sep 1999, Mandarin Singapore, Singapore).
  6. Baidya, K P, S Ramakrishna*, A Campbell and M Rahman, “Design and evaluation of composite external fracture fixation device”. Proceedings of teh 12th International Conference on Composite Materials, ed. T Massard and A Vautrin (1999): 496. France. (12th International Conference on Composite Materials, 1 Jul 1999, Paris, France) (Composites).
  7. Prakash, J R S, M Rahman*, S Ramakrishna and D C G Tan, “Machining of fibre reinforced composites”. Proceedings of the ICCE/6 Sixth Annual International Conference on Composites Engineering, ed. David H (1999): 683-684. Florida, USA. (Proceedings ofthe ICCE/6 Sixth Annual International Conference on Composites Engineering, 27 Jun 1999).
  8. Tay*, E H, E A Haider and M Rahman, “Fabrication of EDM electrodes integrating direct metal laser sintering and plating techniques”. Proceedings of the 5th International Conference on Manufacturing Technology (1999): 11-14 (31 Oct – 3 Nov 1999, Beijing, China).
  9. Tay*, E H, M Rahman and E A Haider, “Improving surface quality of direct laser sintered metal”. Proceedings of the 6th International Conference on Composites Engineering 1999 (1999): 285-286 (27 Jun – 3 Jul 1999, Orlando, Florida, United States).
  10. Choudhury, M R, M Rahman*, A Senthil kumar and S P Chuang, “Machining with high pressure coolant”. Proceedings of the International Symposium on Manufacturing and Robotia (1998). Ottawa/Canada. (Proceedings of the International Symposium on Manufacturing and Robotia, 1 Jan 1998).
  11. Rahman, M, “Region harmonised machine tools produced in Singapore”. Proceedings of the 3rd International Symposium on THOMAS, ed. Y Ito, F Runner and K Ruth (1998): 119-133. Germany. (THOMAS, 27 – 28 Jul 1998).
  12. Rahman, M, K S Lee, Y S Wong and W J R Koh, “A study on the parameters of high speed machining.”. Proceedings of the 8th International Manufacturing Conference, ed. N He, J H Xu, Y S Wong & S K Ong (1998): 353-359. Singapore: Goh Brothers Enterprise. (Proceedings of the 8th International Manufacturing Conference, 12 – 16 May 1998, Singapore).
  13. Rahman, M, “Detention of the onset of shatter”. Proceedings of the Asian Machine Tool Engineering Forum ’97, comp. Japan Machine Tool Builders’ Association (1998): 3-12. Tokyo/Japan: Japan Machine Tool Builders’ Association. (Proceedings of the Asian Machine Tool Engineering Forum ’97, 1 Jan 1998).
  14. Hong*, G S, M Rahman and Q Zhou, “Tool condition monitoring using neural network”. Proceedings of the 26th International Symposium on Industrial Robots (1995): 455-460. Singapore: International Federation of Robotics. (Proceedings of the 26th International Symposium on Industrial Robots, 4 Oct 1995).
  15. Rahman*, M, Q Zhou and G S Hong, “Application of Kohonen neural network for tool condition monitoring”. International Conference on Intelligent Manufacturing, Wuhan, China. Proceedings of SPIE – The International Society for Optical Engineering, vol. Vol. 2620 (1995): 422-428. Bellingham, WA/USA: Society of Photo-Optical Instrumentation Engineers. (International Conference on Intelligent Manufacturing, Wuhan, China, 10 Jun 1995, Wuhan, China).
  16. Subramanian, G, M Rahman and Y S Wong*, “Tool Clustering Technique using Tool Life”. Proceedings of the Pacific Conference on Manufacturing (1994): 150-157. Indonesia. (Proceedings of the Pacific Conference on Manufacturing, 19 – 22 Dec 1994, Indonesia).
  17. Zhou*, F, M Rahman and M A Mansur, “Steel fibre reinforced concrete for machine tool structure”. Proceedings of the International Conference on Production/Precision Engineering, ed. E Usui (1994): 259-264. Netherlands: Elsevier Science Publishers B.V. (Proceedings of the International Conference on Production/Precision Engineering, 15 – 17 Sep 1994, Chiba, Japa
  18. Zhou*, Q, G S Hong* and M Rahman, “A Neural Network Approach for the On-line Diagnosing of Tool Wear”. Proceedings of the IEEE International Conference on Neural Network Applications to Signal Processing (1993): 132-137. Singapore. (Proceedings ofthe IEEE International Conference on Neural Network Applications to Signal Processing, 17 – 20 Aug 1993).
  19. Seah*, K H W, M Rahman, T N Goh and C H Lee, “How coatings on tool inserts affect machining parameters”. Proceedings, Manutech 92: National Symposium on Manufacturing Technology (1992): D2/8-D2/15. Singapore: Nanyang Technological University. (Proceedings, Manutech 92: National Symposium on Manufacturing Technology, 24 Sep 1992).
  20. Yeo*, S H, Y S Wong and M Rahman, “Optimisation of multi-pass turning with constraints”. Proceedings of IMACS/SICE International Symposium on Robotics, Mechatronics and Manufacturing Systems (1992): 113-119 (Proceedings of IMACS/SICE International Symposium on Robotics, Mechatronics and Manufacturing Systems, 16 – 20 Sep 1992, Kobe, Japan).
  21. Lee*, C H, M Rahman, T N Goh and K H W Seah, “Coated cermet – Another new and innovative cutting tool material”. Proceedings, 3rd International Conference on High Technology: Materials Science and Manufacturing Technology (1992): 353-358 (Proceedings, 3rd International Conference on High Technology: Materials Science and Manufacturing Technology, 18 – 19 Sep 1992, Chiba, Japan).
  22. Orita*, H, S Hori, N Nishiwaki, M Tsutsumi and M Rahman, “Determination of clamping force by ultrasonic waves or fuzzy control”. PPS International Regional Meeting on Rheology and Polymer Processing (1990): 112-115. North Korea. (PPS International Regional Meeting on Rheology and Polymer Processing, 26 – 29 Sep 1990, Seoul, North Korea).
  23. Shinno, H, M Rahman* and K J Huang, “In-process monitoring of machining environment using heat flux sensor”. Proceedings of the Spring Annual Meeting of the Japan Society of Precision Engineering, ed. The Japan Society of Precision Engineering (1990): 829-830. Tokyo: The Japan Society of Precision Engineering. (In Japanese). (Proceedings of the Spring Annual Meeting of the Japan Society of Precision Engineering, 1 Jan 1990, Tokyo, Japan).
  24. Shinno, H, M Rahman* and C Inaba, “Performance evaluation of heat flux sensors as in-process monitoring device”. Proceedings of the Winter Annual Meeting of the Japan Society of Precision Engineering, ed. The Japan Society of Precision Engineering (1990): 382-383. Tokyo: The Japan Society of Precision Engineering. (In Japanese). (Proceedings of the Winter Annual Meeting of the Japan Society of Precision Engineering, 1 Jan 1990, Hokkaido, Japan).
  25. Shinno*, H, M Rahman and K J Huang, “In process monitoring of machining environment using heat flux sensor”. Proceedings of the International Conference on Manufacturing System and Environment – Looking Toward 21st Century (1990): 99-104 (Proceedings of the International Conference on Manufacturing System and Environment – Looking Toward 21st Century, 28 May – 1 Jun 1990, Japan).
  26. Chai, O H, Y S Wong, A N Poo, F S Lim and M Rahman, “Development and evaluation of parabolic interpolators for CNC”. Proceedings of the International Conference on Automation, Robotics and Computer Vision (ICARCV) ’90 (1990): 791-795. Singapore: McGraw-Hill Book Co. (Proceedings of the International Conference on Automation, Robotics and Computer Vision (ICARCV) ’90, 18 – 21 Sep 1990, Singapore).
  27. Rahman*, M and M A Mansur, “Performance of ferrocement as machine tool structures”. Proceedings of the First International Conference on New Manufacturing Technology (1990): 455-460 (Proceedings of the First International Conference on New Manufacturing Technology, 28 Feb – 3 Mar 1990, Japan).
  28. Hawlader*, M N A, M Rahman, M A Mansur and Y K Yip, “Thermal effects on structure made of cementitious materials.”. Proceedings of the International Manufacturing Technology Conference ’90 (1990) (In Technical Paper No. EM90-308). (Proceedings of the International Manufacturing Technology Conference ’90, 5 – 13 Sep 1990, United States).
  29. Chua, M S, M Rahman and Y S Wong, “Integrated machinability database system”. Proceedings, 3rd International Conference on Advances in Manufacturing Technology (1989): 1-8 (Proceedings, 3rd International Conference on Advances in Manufacturing Technology, 14 – 16 Aug 1989, Singapore).
  30. Wong, Y S, M Rahman and W L Mark, “A PC-based interpolator for CNC control using the DDA interpolation algorithm”. Proceedings, 3rd International Conference on Advances in Manufacturing Technology (1989) (Proceedings, 3rd International Conference on Advances in Manufacturing Technology, 14 – 16 Aug 1989, Singapore).
  31. Yeo, S H, V C Venkatesh and M Rahman, “Investigative work on expert systems for machinability- data selection”. Proceedings, 3rd International Conference on Computer-Aided Production Engineering (1988): 696-704 (Proceedings, 3rd International Conference on Computer-Aided Production Engineering, 1 – 3 Jun 1988, Michigan, United States).
  32. Rahman*, M, M A Mansur, W D Ambrose and K H Chua, “A study on the application of cementitious materials for machine tool structures”. Proceedings, 6th International Conference on Production Engineering (1987): 448-453. Japan. (Proceedings, 6th International Conference on Production Engineering, 10 – 13 Nov 1987).
  33. Chua*, K H, M Rahman and M A Mansur, “Modal analysis technique for design improvements”. Proceedings, 5th International Modal Analysis Conference (1987) (Proceedings, 5th International Modal Analysis Conference, 6 – 9 Apr 1987, London, United Kingdom).
  34. Rahman, M and K H Chua, “Evaluation of machine tool structures using modal analysis technique”. Seminar on CAE in Application Defence Science Organisation (1987): 1-8. Singapore. (Seminar on CAE in Application Defence Science Organisation, 1 Jan 1987, Singapore).
  35. Narayanan*, V, M Rahman and V C Venkatesh, “Expert system for automatic part programming”. Proceedings, Regional Seminar on Production Technology (1986) (Proceedings, Regional Seminar on Production Technology, 1 Jan 1986, Malaysia).
  36. Narayanan*, V, V C Venkatesh and M Rahman, “Automatic programming and its integration with a manufacturing data base using micro-computers”. Proceedings, International Conference on Computer-Aided Production Engineering (1986): 195-199 (Proceedings, International Conference on Computer-Aided Production Engineering, 1 Jan 1986, Edinburgh, United Kingdom)
  37. Narayanan, V and M Rahman, “Knowledge based system for machine tools”. Proceedings, IEEE Workshop on Languages for Automation (1986). Singapore. (Proceedings, IEEE Workshop on Languages for Automation, 25 – 29 Aug 1986, Singapore).
  38. Rahman*, M and V C Venkatesh, “The machine tool rigidity factor in modelling a computerised machinability data base system”. Proceedings, 4th International Modal Analysis Conference (1986): 1553-1557 (Proceedings, 4th International Modal Analysis Conference, 1 Feb 1986, United States).
  39. Nee, A Y C, K S Lee, M Rahman and K S Ang, “Automatic programming of NC machines with interactive graphics”. Proceedings, SRA International Conference on Automation in Manufacturing (1986): 48-59. Singapore. (Proceedings, SRA International Conference on Automation in Manufacturing, 18 – 21 Nov 1986, Singapore).
  40. Rahman*, M, V Narayanan and V C Venkatesh, “Evaluation of optimum stiffness and damping for structural design of machine tools”. Proceedings, 4th International Modal Analysis Conference (1986): 532-535 (Proceedings, 4th International Modal Analysis Conference, 1 Feb 1986, United States).
  41. Rahman*, M and Y Ito, “Optimization of clamping in turning”. Proceedings, 11th All India Machine Tools Design and Research Conference (1984): 201-207 (Proceedings, 11th All India Machine Tools Design and Research Conference, 1 Jan 1984, Madras, India).
  42. Rahman*, M and Y Ito, “Stability analysis for three-jaw chuck turning process”. Proceedings, International Conference on Production Engineering (1984): 509-513 (Proceedings, International Conference on Production Engineering, 1 Jan 1984, Japan).
  43. Rahman*, M and Y Ito, “A method to determine the chatter threshold”. Proceedings, 19th International Machine Tool Design & Research Conference (1978): 191-196 (Proceedings, 19th International Machine Tool Design & Research Conference, 1 Jan 1978, Manchester, United Kingdom).
  44. Rahman*, M and Y Ito, “Effect of 3-jaw chuck on machining accuracy”. Precision Engineering Conference (1977): 187-188 (Precision Engineering Conference, 1 Jan 1977, Japan).
  45. Rahman*, M, Y Nojiri and Y Ito, “A study on the onset of chatter”. Proceedings, 20th Conference of Japan Society of Mechanical Engineers (1977): 120-123 (Proceedings, 20th Conference of Japan Society of Mechanical Engineers, 1 Jan 1977, Japan).
  46. YU*, D, S.W. GAN, Y S Wong, M Rahman and G S Hong, “An Optimization Approach for Tool Path Generation of Micro-structured Surfaces in FTS-based Diamond Turning”. 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology (11 – 13 Nov 2009, Station Hotel Kokura, Kitakyushu, Japan) (All papers compiled in a CD-ROM. Paper receives Best Paper Award).
%d bloggers like this: